Lynxmotion Phoenix 3DOF Hexapod - Black (No Servos / Electronics)

Lynxmotion Phoenix 3DOF Hexapod - Black (No Servos / Electronics)
Aluminum Legs (Black)
3 Degrees of freedom per leg
“Organic” look and feel
Height (body): 2" (overall, standing normally): up to 5.25"
Width (body): 5.88" (overall, standing normally): up to 17"
Length (body): 7.50" (overall, standing normally): 14.50"
Weight (w/out batteries) 3lb, 10oz
Ground Clearance: up to 5.5"
Requires additional components

The Lynxmotion Phoenix Hexapod Robot (Black) has a more natural looking, more articulate leg and body design. The three DOF (degree of freedom) leg design means this robot can walk in any direction! The robot has been designed to use 18 Hitec HS-645 servos for the legs. The Phoenix's motions look natural and the overall robot has a more organic look. The kit needs additional components below to be complete:

Additional Components Required
18x Hitec HS-645 servos (Hitec HS-645MG Servo Motor )
Electronics (SSC-32 or other servo controller) (Lynxmotion SSC-32 Servo Controller )
6V DC Battery Pack (6V, 2800mAh, NiMH Battery ) and optional wires (Quick Connect Battery Connector )
Microcontroller (optional)

Specifications
Waterjet cut 6061 T6 aluminum components
Tibia and Femur parts are made from 0.125" thick material,
Chassis parts are made from 0.063" thick material.
Reduced payload capacity compared to other hexapods
Omnidirectional motion
3 degrees of freedom per leg
Motion Speed: 10"/S

What's Included
1x Phoenix Chassis Kit (PHBK)
3x Phoenix Leg Pair (no servos) (PHLEG)