Seeed XIAO RP2040 Support Arduino MicroPython

Seeed XIAO RP2040 Support Arduino MicroPython CircuitPython
is a microcontroller using the Raspberry Pi RP2040 chip. The MCU runs at up to 133MHz.It is built with rich interfaces in a tiny thumb size and fully supports Arduino, MicroPython, and CircuitPython

Features :
Powerful MCU: Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
Rich on-chip resources: 264KB of SRAM, and 2MB of onboard Flash memory
Flexible compatibility: Support Micropython/Arduino/CircuitPython
Easy project operation: Breadboard-friendly & SMD design, no components on the back
Small size: As small as a thumb(20x17.5mm) for wearable devices and small projects
Multiple interfaces: 11 digital pins, 4 analog pins, 11 PWM Pins,1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD Bonding pad interface

Spec :
CPU : Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
Storage : 264KB of SRAM, and 2MB of onboard Flash memory
I/O PINs : 11 digital pins, 4 analog pins, 11 PWM Pins
Interface : 1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD Bonding pad interface
Power supply & Downloading interface :USB Type-C interface
LEDs: 1 user LED, 1 power LED, two LEDs for serial port downloading, 1 RGB LED
Button : 1 RESET button, 1 BOOT button
Power Pads : For the battery power supply
Software compatibility : Support Micropython / Arduino / CircuitPython
Cover : Projection cover for protecting the circuit
Dimensions : 20x17.5x3.5 mm

Application :
Wearable devices
Rapid prototyping (directly attached to the expanded PCB as a minimal system)
Perfect for all the projects that need mini Arduino
DIY keyboard
USB development (USB to multi-channel TTL/USB host mode, etc.)

WIKI : https://wiki.seeedstudio.com/XIAO-RP2040/