SIM7000E NB-IoT eMTC EDGE GPRS GNSS Raspberry Pi HAT

SIM7000E NB-IoT eMTC EDGE GPRS GNSS Raspberry Pi HAT A HAT for Raspberry Pi that provides multiple communication functions such as NB-IoT, eMTC, EDGE, GPRS, and GNSS. NB-IoT (NarrowBand-Internet of Things) and eMTC (enhanced Machine Type Communication) are IoT technologies resulting from the evolution of 4G (LTE) technology. This technology is ideal for applications such as intelligent instruments, remote control, asset tracking, remote monitoring, E-health, mobile POS terminals, sharing bikes, and so on. On the other hand, the provided GPRS amp; EDGE connection can also be used to send SMS or perform other wireless communications. Specification: - The power supply uses 5V voltage - Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ - Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc. - Supports GNSS positioning (GPS,GLONASS,BeiDou and Galileo) - Equipped with an onboard USB interface, to try AT Commands, get GPS position data, and so on. - Equipped with a UART control pin breakout, for connection to host boards such as Arduino/STM32 - Equipped with an onboard voltage translator - Equipped with a SIM card slot that is compatible with normal SIM cards and NB-IoT cards - Equipped with 2 LED indicators to monitor the working status of the module - Baud rate range from 300 bps to 3,686,400 bps - Equipped with control features via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) - Support SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT - Dimensions 30.2 x 65 mm data sheet : https://www.waveshare.com/wiki/SIM7000E_NB-IoT_HAT