XIAO ESP32S3 Sense 2.4GHz WiFi BLE 5.0 OV2640 Camera

Seeed Studio XIAO ESP32S3 Sense 2.4GHz WiFi BLE 5.0 OV2640 Camera Sensor Digital Microphone 8MB PSRAM 8MB FLASH Battery Charge Supported, Rich Interface, IoT, embedded ML Seeed Studio XIAO ESP32S3 leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB FLASH, and external SD card slot. All of these make it suitable for embedded ML, like intelligent voice and vision AI. Application Image processing Speech Recognition Video Monitoring Wearable devices Smart Homes Health monitoring Education Low-Power(LP) networking Rapid prototyping Specification: Processor : ESP32-S3R8 Xtensa LX7 dual-core,32-bit processor that operates at up to 240 MHZ Wireless : Complete 2.4GHz Wi-Fi subsystem BLE: Bluetooth 5.0, Bluetooth mesh Built-in Sensors : oV2640 camera sensor for 1600*1200 Digital Microphone Memory : On-chip 8M PSRAM amp; 8MB Flash Onboard SD Card Slot, supporting 32GB FAT lnterface : 1x UART,1x lIC,1x lIS,1x SPI,11x GPIOs (PWM),9xADC，1x User LED, 1x Charge LED,1x B2B Connector(with 2 additional GPIOs) 1x Reset button, 1x Boot button Dimensions : 21 x 17.5 x 15mm (with expansion board) Power : Input voltage (Type-C): 5V lnput voltage (BAT): 4.2V Part List XIAO ESP32S3 x1 Plug-in camera sensor board x1 Antenna x1 WIKI : https://wiki.seeedstudio.com/xiao_esp32s3_getting_started/