✅Specification Model: EG-012 Rated power: 100W Battery capacity: 24000mAh Output waveform: Correction Wave AC output voltage: 220V ±15% AC output frequency: 50Hz ±2Hz Conversion efficiency: maximum >90% Charging interface: external charger interface and solar panel charging interface DC5521*1 (built-in solar intelligent controller) AC output socket: universal seat DC output voltage: DC5V 2.4A, 2*USB; DC12V3A, 2*DC5521 LED light: LED light bright, LED light half bright, LED light flashing, LED light off 4 states ✅What in the box(100W Original Set): Power bank*1 Charger*1 ✅Precautions: 1. Beware of electric shock! Keep away from Children! 2. Do not connect the inverter of the mobile power supply device to the AC circuit, otherwise there is a risk of damage to the device inverter even if the device switch is turned off. 3. Please ensure that the power used by the electrical appliance is less than the rated output power of the mobile power device. 4. Before connecting the load to the mobile power supply device, be sure to turn off the load switch before connecting it, and then turn on the load switch for use. 5. It is recommended to charge the mobile power device for at least 10 hours before use. 6. When charging, insert the AC adapter power charger into the mobile power charging port. 7. It is forbidden to connect half-wave (hair dryer, electric heating wire heater) load, high-power motor, laser printer, high-power rectifier load, because the starting power is too large during operation, the machine will automatically protect. 8. The TV is a capacitive load, which has a greater impact on the inverter and requires more power. 9. Load types: AC or DC fans, AC or DC LED lights, digital products, mobile phone charging, computers, laptops, etc.