Atur jumlah dan catatan
Stok Total: 670
Subtotal
Rp402.798
AT AVRISP mkII AVR ISP mk2 USB AVRISP XPII In-System Programmer Supports AVR Studio 4&5&6&7
Rp402.798
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : SZFYDOSH
Model Number : AVRISP
Origin : Mainland China
Type : Other
Application : Other
Supply Voltage : .
Dissipation Power : N/A
Operating Temperature : .
is_customized : Yes
Condition : New
Package : Other
tmel AT AVRISP mkii AVR ISP mk2 USB AVRISP XPII In-System Programmer Supports AVR Studio 4&5&6&7
Support WIN10, but when you use WIN10, please download AVR Studio >7
1.Supports all AVR devices with ISP or PDI interface, and certain 51 Devices
2.Programs both Flash and EEPROM
3.Supports Fuses and Lock Bit Programming
4.Based on AT AVRISP mkII firmware
5.Upgradable to support future devices
6.Adjustable ISP programming speed up to 8M frequency
7.USB 2.0 compliant (full speed, 12Mbps)
8.3 optional cables to target board
9.Powered from USB bus, does not require external power supply
AT AVRISP mkII compliant
1. Compatible with AT AVR ISP, easy to use, stable and reliable
Based on AT AVRISP mkII firmware
1. Identified as AVRISP mkII in AVRStudio, high speed programming
Upgradable firmware
1. Firmware is upgradable to Support Future Devices
2. Automatic Upgrade
Supported software
1.AVR Studio6 or WINAVR(GCC) is used as front-end software
2. Supports the program files generated by IAR, ICCAVR, CVAVR
SupportedDevice
1. USB AVRISP XPII supports all AVR devices with ISP and PDI Interface. Support for new devices will be added with new versions of AVR Studio.
2. Supports AT86RF401/AT89S51/AT89S52
Refer toAVR Studio 6, the following devices are supported:
* Supports all the different voltages and speed grade versions of the devices listed in the table above.
Performance
1. High speed programs FLASH , EEPROM, Fuses, and Lock Bit
2. It takes only 2.5S to program a 12K program file with verification (programming speed was set to 1M while the Max speed could be up to 8M)
Connects to PC
1. Uses a USB interface for communication with the front-end software (Probably AVR Studio)
2. Using PDIUSBD12, USB 1.1 (USB 2.0 Full Speed) 12Mbits/second
3. Each USB AVRISP XPII has a unique ID, a PC could connects to several Devices at the same time
Connects to target board
The USB AVRISP XPII connects to the target board through 3 optional cables. Depending on the existed connector on the target board, the cable has to be changed accordingly.
1. Sandard 6-pin ISP Connector, Using 6-pin ISP cable
2. Standard 10-pin ISP Connector, Using 6-pin to 10-pin ISP cable
3. Custom ISP Connector, Using 6-wire multicolour custom connector cable
The figure 1 and 2 show the pinouts for the 10-pin and 6-pin ISP connectors.
Powered from USB bus
1. Draws power from the USB bus, No need for Additional Power Supply
2. The target board should be powered from Another Power Supply
Package Contains:
1. USB AVRISP MKII
2.USB Cable
3.6-pin to 10-pin ISP cable
4.User Guide CD
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : SZFYDOSH
Model Number : AVRISP
Origin : Mainland China
Type : Other
Application : Other
Supply Voltage : .
Dissipation Power : N/A
Operating Temperature : .
is_customized : Yes
Condition : New
Package : Other
tmel AT AVRISP mkii AVR ISP mk2 USB AVRISP XPII In-System Programmer Supports AVR Studio 4&5&6&7
Support WIN10, but when you use WIN10, please download AVR Studio >7
1.Supports all AVR devices with ISP or PDI interface, and certain 51 Devices
2.Programs both Flash and EEPROM
3.Supports Fuses and Lock Bit Programming
4.Based on AT AVRISP mkII firmware
5.Upgradable to support future devices
6.Adjustable ISP programming speed up to 8M frequency
7.USB 2.0 compliant (full speed, 12Mbps)
8.3 optional cables to target board
9.Powered from USB bus, does not require external power supply
AT AVRISP mkII compliant
1. Compatible with AT AVR ISP, easy to use, stable and reliable
Based on AT AVRISP mkII firmware
1. Identified as AVRISP mkII in AVRStudio, high speed programming
Upgradable firmware
1. Firmware is upgradable to Support Future Devices
2. Automatic Upgrade
Supported software
1.AVR Studio6 or WINAVR(GCC) is used as front-end software
2. Supports the program files generated by IAR, ICCAVR, CVAVR
SupportedDevice
1. USB AVRISP XPII supports all AVR devices with ISP and PDI Interface. Support for new devices will be added with new versions of AVR Studio.
2. Supports AT86RF401/AT89S51/AT89S52
Refer toAVR Studio 6, the following devices are supported:
* Supports all the different voltages and speed grade versions of the devices listed in the table above.
Performance
1. High speed programs FLASH , EEPROM, Fuses, and Lock Bit
2. It takes only 2.5S to program a 12K program file with verification (programming speed was set to 1M while the Max speed could be up to 8M)
Connects to PC
1. Uses a USB interface for communication with the front-end software (Probably AVR Studio)
2. Using PDIUSBD12, USB 1.1 (USB 2.0 Full Speed) 12Mbits/second
3. Each USB AVRISP XPII has a unique ID, a PC could connects to several Devices at the same time
Connects to target board
The USB AVRISP XPII connects to the target board through 3 optional cables. Depending on the existed connector on the target board, the cable has to be changed accordingly.
1. Sandard 6-pin ISP Connector, Using 6-pin ISP cable
2. Standard 10-pin ISP Connector, Using 6-pin to 10-pin ISP cable
3. Custom ISP Connector, Using 6-wire multicolour custom connector cable
The figure 1 and 2 show the pinouts for the 10-pin and 6-pin ISP connectors.
Powered from USB bus
1. Draws power from the USB bus, No need for Additional Power Supply
2. The target board should be powered from Another Power Supply
Package Contains:
1. USB AVRISP MKII
2.USB Cable
3.6-pin to 10-pin ISP cable
4.User Guide CD
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan