Bondite Epoxy Putty

A versatile hand kneadable, fast setting co-extruded epoxy repair system that can be used for repairing a multitude of things. It is especially suitable for application to damp, wet or underwater substrates. It comes in a handy roll form, with the white hardener encapsulated in the aqua green resin part. The product hardens in 20 – 30 minutes after mixing, to a white solid material.

Creating water features/ attaching pebbles under water in pond
Sealing holes in foundations and outer walls
Repairing generators, water and fuel pumps
Re-setting ceramic tiles in swimming pools etc
For fast and permanent repairs to damp and wet substrates, and even for underwater repairs
Patching dings, scratches, cuts, gouges and holes in fibreglass, metal and wooden boat decks and hulls
Repair of pipes, fittings, electrical connections, water tanks, tubs, sinks, spas, hot tubs, tanks, pools, leaking gaskets
Forming custom gaskets etc
Ideal for emergency in-water repairs
Repairing fishtanks, ponds, pools
Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible.
Set time increases at temperatures below 20°C
Not recommended for use where hydrostatic pressure is present prior to cure
What materials is this product suitable for?

Fibreglass
Wood/Timber
Ceramics
Metal
Concrete
Glass
Most plastics (pre-test required)
Masonry
How to use this product

Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. Wear gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 12 minutes of mixing) and work the material forcefully into the surface applying pressure until adhesion begins to take effect. Mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smoo