5.0/ 5.0
100% pembeli merasa puas
22 rating • 4 ulasan
5(21)95.45%
4(1)4.55%
3(0)0%
2(0)0%
1(0)0%
M
Atur jumlah dan catatan
Stok: 928
Subtotal
Rp99.500
SAFETY GLOVE PALM FIT PIP ATG MAXIFLEX 34-874 ULTIMATE ORIGINAL - M
Rp99.500
Pilih ukuran: M
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Hand Protection
SAFETY GLOVE PALM FIT PIP ATG MAXIFLEX 34-874 ULTIMATE ORIGINAL
SEMUA PRODUK YANG KAMI JUAL MERUPAKAN PRODUK ORIGINAL 100%
NOTE :
MINIMUM ORDER 10 PCS
ORDER KURANG DARI 10 PCS TIDAK AKAN KAMI PROSES KECUALI KEBUTUHAN SAMPLE
MAXIFLEX ULTIMATE SEAMLESS KNIT NYLON / LYCRA GLOVE WITH NITRILE COATED MICRO-FOAM GRIP
• Micro-Foam Nitrile coatings are compatible with light oils and will
provide a good grip and excellent abrasion resistance
• Knit Wrist helps prevent dirt and debris from entering the glove
• 100% Silicone-free
• Patented micro-foam nitrile coating offers 360° breathability,
• 25% thinner than most foam nitrile gloves on the market
• Mimics the “hand at rest”, reducing hand fatigue & increasing comfort
• The micro-cup finish allows for a controlled and optimized grip
• CFIA Approved
• Complies with FDA food handling requirements 21 CFR, Part 177
APPLICATIONS
• General assembly
• Micro-engineering
• Automotive components
• Painting
• Horticulture
CARE INSTRUCTIONS
Recommend washing gloves in slightly warm water not exceeding
40°C. A mild non-ionic detergent should be used. A 5-10 minute
cycle time should be employed. Tumble dry on low - maximum
temperature 140°F (60°C).
SEMUA PRODUK YANG KAMI JUAL MERUPAKAN PRODUK ORIGINAL 100%
NOTE :
MINIMUM ORDER 10 PCS
ORDER KURANG DARI 10 PCS TIDAK AKAN KAMI PROSES KECUALI KEBUTUHAN SAMPLE
MAXIFLEX ULTIMATE SEAMLESS KNIT NYLON / LYCRA GLOVE WITH NITRILE COATED MICRO-FOAM GRIP
• Micro-Foam Nitrile coatings are compatible with light oils and will
provide a good grip and excellent abrasion resistance
• Knit Wrist helps prevent dirt and debris from entering the glove
• 100% Silicone-free
• Patented micro-foam nitrile coating offers 360° breathability,
• 25% thinner than most foam nitrile gloves on the market
• Mimics the “hand at rest”, reducing hand fatigue & increasing comfort
• The micro-cup finish allows for a controlled and optimized grip
• CFIA Approved
• Complies with FDA food handling requirements 21 CFR, Part 177
APPLICATIONS
• General assembly
• Micro-engineering
• Automotive components
• Painting
• Horticulture
CARE INSTRUCTIONS
Recommend washing gloves in slightly warm water not exceeding
40°C. A mild non-ionic detergent should be used. A 5-10 minute
cycle time should be employed. Tumble dry on low - maximum
temperature 140°F (60°C).
Ada masalah dengan produk ini?