Atur jumlah dan catatan
Stok Total: 20
Subtotal
Rp25.625.000
Jual Fluke 789 Process Meter onderdil top
Rp25.625.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Perlalatan Instruments
Deskripsi Fluke 789 Process Meter onderdil top
ask for stock Fluke 789
Process Meter with 250 Ohm HART resistor
The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it's even better, the range is extended with the new Fluke 789 the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing off transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.
Features of the FlukeV Loop power supply
Very large dual display
Enhanced backlight with 2 brightness settingsOhm drive capability on mA source
HART mode setting with loop power and a built-in 250 ohm resistor
0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
Externally accessible fuses for easy replacement
Infrared-port to process data in FlukeView Forms (V2.1) softwareFluke 789 features that are also included in the FlukePrecision mA True-RMS digital Multimeter% dc voltage accuracy% dc current accuracy
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
Simultaneous mA and % of scale readoutmA DC current source / loop calibrator / simulator
ProcessMeterAC72 Alligator Clips
Four AA 1.5 V alka battery (installed)
TL71 Safety-Designed Test lead Set
Users Manual and Quick Reference GuideManual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
ask for stock Fluke 789
Process Meter with 250 Ohm HART resistor
The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it's even better, the range is extended with the new Fluke 789 the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing off transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.
Features of the FlukeV Loop power supply
Very large dual display
Enhanced backlight with 2 brightness settingsOhm drive capability on mA source
HART mode setting with loop power and a built-in 250 ohm resistor
0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
Externally accessible fuses for easy replacement
Infrared-port to process data in FlukeView Forms (V2.1) softwareFluke 789 features that are also included in the FlukePrecision mA True-RMS digital Multimeter% dc voltage accuracy% dc current accuracy
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
Simultaneous mA and % of scale readoutmA DC current source / loop calibrator / simulator
ProcessMeterAC72 Alligator Clips
Four AA 1.5 V alka battery (installed)
TL71 Safety-Designed Test lead Set
Users Manual and Quick Reference GuideManual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan