Reusable Plastik Syringe Filter Holder 50 mm For Membrane Filter

Reusable Plastik Syringe Filter Holder 50 mm For Membrane Filter Reusable Syringe Filter Holder 50 mm For Membrane The Reusable Syringe Filter holders are unaffected by chemicals and contains no trace elements which could be released into the liquid being filtered. It is therefore extremely well suited for particle removal for sample preparation. Feature Compatibility Chemical resistance as for polycarbonate and silicone Dead volume Less than 0.3 ml after bubble point 50 mm diameter membrane filter 25 mm diameter Filtration area 3 cm2 Flow rates : Typical values for water at 1 bar (100 kPa), 70 ml/min (0.2)μm 110 ml/min (0.45) μm pore size filters Materials : polypropylene top and bottom part. Silicone gasket (20.5 x 26.5mm, replacement for a pack of 10) Pressure limit : Max. operating pressure, 7 bar (700 kPa) Sterilization By autoclaving (121°C) Application Gas particulate and bacteria filtration and then inspect them Oil particulate and bacteria filtration and then inspect them Alcohol particulate and bacteria filtration and then inspect them Other solvent particulate and bacteria filtration and then inspect them Harga adalah untuk 1 set holder