4.5/ 5.0
96% pembeli merasa puas
30 rating • 30 ulasan
5(16)53.33%
4(13)43.33%
3(1)3.33%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 7
Subtotal
Rp98.000
Fitting Lampu Remote Control
Rp98.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Lain-Lain
Remote kontrol untuk lampu penerangan. Praktis penggunaannya.
Pasang Fitting ini ke fitting yang sudah ada, alat lsg bisa digunakan. Tidak ada tambahan instalasi dan tidak perlu merubah instalasi yang ada.
Baterai Remote 23AE 12Volt (termasuk)
Specifications:
1. Launch no sound, no direction, can be separated from the wall the number of remote control, remote control distance of not less than 10 meters;
2. To receive sensitive and reliable control the frequency of up to hundreds of thousands of times;
3. Imported IC code, there are millions of different codes, will not result in similar products with the neighbors when using the phenomenon of mutual control;
4. This product uses 220V AC power, long-term electricity use. The lamp and the receiver together, the heat generated when the light bulb will affect the electronic components in the receiver, so the power should be 40W bulbs the following;
5. Ultra-Low-power design, standby current: 220V 50uA (less than 0.015W);
6. Working voltage: AC160 ~ 250V (50/60Hz);
7. Operating frequency: 315 MHZ;
8. Remote control distance: more than 10 meters remote control room wall;
Pasang Fitting ini ke fitting yang sudah ada, alat lsg bisa digunakan. Tidak ada tambahan instalasi dan tidak perlu merubah instalasi yang ada.
Baterai Remote 23AE 12Volt (termasuk)
Specifications:
1. Launch no sound, no direction, can be separated from the wall the number of remote control, remote control distance of not less than 10 meters;
2. To receive sensitive and reliable control the frequency of up to hundreds of thousands of times;
3. Imported IC code, there are millions of different codes, will not result in similar products with the neighbors when using the phenomenon of mutual control;
4. This product uses 220V AC power, long-term electricity use. The lamp and the receiver together, the heat generated when the light bulb will affect the electronic components in the receiver, so the power should be 40W bulbs the following;
5. Ultra-Low-power design, standby current: 220V 50uA (less than 0.015W);
6. Working voltage: AC160 ~ 250V (50/60Hz);
7. Operating frequency: 315 MHZ;
8. Remote control distance: more than 10 meters remote control room wall;
Ada masalah dengan produk ini?