Atur jumlah dan catatan
Stok Total: 148
Subtotal
Rp800.800
YAOGREENHAM New UHF VHF MMDVM jumbospot hotspot OLED Board Kit Offset
Rp800.800
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
YAOGREENHAM New UHF VHF MMDVM jumbospot hotspot OLED Board Kit Offset
Deskripsi :
Model Number : KSYMMDVM
Brand Name : YAOGREEN
Origin : Mainland China
Certification : NONE
New arrival :If you want to buy the finished MMDVM hotspot power bank ,please click this link
#
Antenna + Case + OLED + MMDVM hotspot Support P25 DMR YSF for Raspberry pi
STM32_MMDVM_HS HAT Rev1.7 Guide
new pi4b need remove R1 Resistor.
1.Hardware add (SDA,SCL)R20,R21 Connect stm32 i2c 2 bus to OLED,and raspi. oled message pwr on without RPI using mmdvm_hs custom fw,and i2c 2 bus.
2.Support i2c communition with raspi
Setting For Pi-star software and raspberry hardware (rpi 0-3) new pi4b need remove R1 Resistor.
Controller Mode:
Simplex Node
Radio Frequency : Freq:
144-148
,219-225,
(Main Band)420-475
,842-950
Example:438.000000
Radio/Modem Type:
STM32-DVM(GPIO)
14.7456 TCXO with RXOFFSET=0 TXOFFSET=0
Quick start:
1.download image
https://www.pistar.uk/downloads/
write it to card
2.insert card to rpi
3.wait to boot 5 minutes connect wifi
Pi-star-setup
pass
raspberry
4.open
http://pi-star/admin/
5.set freq ,dmr id ,dmr mode,add home's wifi ssid...
Default Username: pi-star
Default Password: raspberry
to support i2c communication change MMDVM_HS code(by Andy Uribe CA6JAU)->Config.h
// Host communication selection:
//#define STM32_USART1_HOST
//#define STM32_USB_HOST
#define STM32_I2C_HOST
to disable i2c 2 to raspi and oled just remove R20,R21
update new FW: (pi-star / expert / ssh access / user :pi-star pass:raspberry)
sudo pistar-mmdvmhshatflash hs_hat
ps:update new FW no oled pwr on message.
mode info pls visit
www.mmdvm.club
Technical
Terimakasih Sudah Belanja di Toko Kami.
Deskripsi :
Model Number : KSYMMDVM
Brand Name : YAOGREEN
Origin : Mainland China
Certification : NONE
New arrival :If you want to buy the finished MMDVM hotspot power bank ,please click this link
#
Antenna + Case + OLED + MMDVM hotspot Support P25 DMR YSF for Raspberry pi
STM32_MMDVM_HS HAT Rev1.7 Guide
new pi4b need remove R1 Resistor.
1.Hardware add (SDA,SCL)R20,R21 Connect stm32 i2c 2 bus to OLED,and raspi. oled message pwr on without RPI using mmdvm_hs custom fw,and i2c 2 bus.
2.Support i2c communition with raspi
Setting For Pi-star software and raspberry hardware (rpi 0-3) new pi4b need remove R1 Resistor.
Controller Mode:
Simplex Node
Radio Frequency : Freq:
144-148
,219-225,
(Main Band)420-475
,842-950
Example:438.000000
Radio/Modem Type:
STM32-DVM(GPIO)
14.7456 TCXO with RXOFFSET=0 TXOFFSET=0
Quick start:
1.download image
https://www.pistar.uk/downloads/
write it to card
2.insert card to rpi
3.wait to boot 5 minutes connect wifi
Pi-star-setup
pass
raspberry
4.open
http://pi-star/admin/
5.set freq ,dmr id ,dmr mode,add home's wifi ssid...
Default Username: pi-star
Default Password: raspberry
to support i2c communication change MMDVM_HS code(by Andy Uribe CA6JAU)->Config.h
// Host communication selection:
//#define STM32_USART1_HOST
//#define STM32_USB_HOST
#define STM32_I2C_HOST
to disable i2c 2 to raspi and oled just remove R20,R21
update new FW: (pi-star / expert / ssh access / user :pi-star pass:raspberry)
sudo pistar-mmdvmhshatflash hs_hat
ps:update new FW no oled pwr on message.
mode info pls visit
www.mmdvm.club
Technical
Terimakasih Sudah Belanja di Toko Kami.
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan