New Pro Micro for Arduino ATmega32U4 / Arduino Pro Micro

New Pro Micro for arduino ATmega32U4 5V/16MHz Module with 2 row pin header For Leonardo Description:This tiny little board does all of the neat-o for Arduino tricks that you #39;re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite for Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you #39;re supplying unregulated power to the board, be sure to connect to the #34;RAW #34; pin on not VCC. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We #39;ve also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit. Features: ATMega 32U4 running at 5V/16MHz Supported under for Arduino IDE v1.0.1 On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os (5 are PWM capable) Rx and Tx Hardware Serial Connections Kemasan segel pabrik.Tidak dibuka.