5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp600.000
Behringer EQ700 Graphic Equalizer 7-Band EQ Pedal Original Garansi
Rp600.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Efek Alat Musik
Behringer EQ700 Graphic Equalizer 7-Band EQ Pedal
ORIGINAL Garansi Resmi
OVERVIEW
A general rule of thumb-the best results are often achieved by finding and reducing the frequency bands that are offending, and then turning up the overall volume, rather than boosting one specific band.
How the specific frequency bands of the EQ700 can shape your sound:
100 Hz (low bass)
Boost: To add fullness to guitars, especially clean electrics
Cut: To reduce muddy or boomy tone and control acoustic guitar feedback
200 Hz (soft bass)
Boost: To increase the warmth of all guitars and provide a slightly harder sound
Cut: To increase clarity and reduce feedback in acoustic guitars
400 Hz (hard bass)
Boost: To add definition to rhythm parts
Cut: To reduce feedback in acoustic guitars (This is a major feedback zone for piezo-equipped flattops)
800 Hz
Boost: To add an aggressive edge to the overall sound
Cut: For reducing the nasal or horn-like content, often referred to as the "cheap guitar" syndrome
1.6 kHz
Boost: To make the guitar cut through the mix. Creates a more distinctive plucked tone
Cut: To eliminate dullness and competition with vocals (vocal fundamentals occupy the range from about 1.0 kHz - 2.5 kHz)
3.2 kHz
Boost: To add significant attack to all guitars. Creates an even more distinctive plucked tone
Cut: To eliminate harshness
6.4 kHz
Boost: To add edge and increase brightness to all guitars
Cut: To soften thin-sounding guitars and remove string squeak
FEATURES
Shape your sound and eliminate feedback with 7 bands of equalization
Designed to compete head to head with leading products on the market
Wide frequency range from 100 Hz to 6.4 kHz with a powerful 15 dB boost/cut per band
Status LED for effect on/off and battery check
Runs on 9V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic on/off switch for highest signal integrity in bypass mode
ORIGINAL Garansi Resmi
OVERVIEW
A general rule of thumb-the best results are often achieved by finding and reducing the frequency bands that are offending, and then turning up the overall volume, rather than boosting one specific band.
How the specific frequency bands of the EQ700 can shape your sound:
100 Hz (low bass)
Boost: To add fullness to guitars, especially clean electrics
Cut: To reduce muddy or boomy tone and control acoustic guitar feedback
200 Hz (soft bass)
Boost: To increase the warmth of all guitars and provide a slightly harder sound
Cut: To increase clarity and reduce feedback in acoustic guitars
400 Hz (hard bass)
Boost: To add definition to rhythm parts
Cut: To reduce feedback in acoustic guitars (This is a major feedback zone for piezo-equipped flattops)
800 Hz
Boost: To add an aggressive edge to the overall sound
Cut: For reducing the nasal or horn-like content, often referred to as the "cheap guitar" syndrome
1.6 kHz
Boost: To make the guitar cut through the mix. Creates a more distinctive plucked tone
Cut: To eliminate dullness and competition with vocals (vocal fundamentals occupy the range from about 1.0 kHz - 2.5 kHz)
3.2 kHz
Boost: To add significant attack to all guitars. Creates an even more distinctive plucked tone
Cut: To eliminate harshness
6.4 kHz
Boost: To add edge and increase brightness to all guitars
Cut: To soften thin-sounding guitars and remove string squeak
FEATURES
Shape your sound and eliminate feedback with 7 bands of equalization
Designed to compete head to head with leading products on the market
Wide frequency range from 100 Hz to 6.4 kHz with a powerful 15 dB boost/cut per band
Status LED for effect on/off and battery check
Runs on 9V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic on/off switch for highest signal integrity in bypass mode
Ada masalah dengan produk ini?