Atur jumlah dan catatan
Stok Total: 143
Subtotal
Rp1.132.000
Lampu Senter LED Isi Ulang Lithium-ion 90708A Sata Tools
Rp1.132.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: LAMPU LED SATA
Lampu Senter LED Isi Ulang Lithium-ion 90708A Sata Tools
-----------------------------
No : 90708A
Brand : Sata Tools
# Light source upgraded to 3 W LED, increasing the brightness by more than 50%
# Battery upgrade, doubling the original electric capacity at least
# Lighting positions include work light, highlight and flashing
# The green indicator comes on in standby mode; during charging, both the green and red indicators come on; when charging is completed, the red indicator will go off, and the green indicator stays on.
# Lithium-ion batteries, effectively protecting the safety of the battery and extending its service life
# Bracket available for angle adjustment. Reflective harness and rainproof design; anti-skid handle, working head and base
# Rated voltage: 3.7 V
# Battery capacity: 6000 mAh
# Discharge time: High power mode: 6 h; low power mode: 3 h
# Recharge time: 4 ~ 7 h
Precautions:
# Never throw the product into water or fire.
# Prevent the product from falling or impacting with hard objects, and avoid scratching or crushing the product.
# If the membrane switch is damaged, replace it immediately to prevent foreign materials from entering.
# The battery is not fully charged upon delivery. Before using the light for the first time, be sure to charge it continuously for more than 12 hours.
# Fully charge and discharge the battery at an interval of at least 6 months. When the battery is used up, please charge it in time to avoid over-discharge.
# Never charge the battery in thundery, rainy or humid conditions; otherwise the appliance or the internal electrical components of power supply would get burnt.
# Always use a dedicated charger. After charging is completed, unplug the charger in time, otherwise it may lead to short circuit or explosion.
# The operating temperature is recommended to be within 0 ~ 26°C, and the allowable operating temperature should be within -10 ~ 40°C. Exceeding the limit would reduce the service life of the product, damage it or even lead to personal injury
Made in China
-----------------------------
No : 90708A
Brand : Sata Tools
# Light source upgraded to 3 W LED, increasing the brightness by more than 50%
# Battery upgrade, doubling the original electric capacity at least
# Lighting positions include work light, highlight and flashing
# The green indicator comes on in standby mode; during charging, both the green and red indicators come on; when charging is completed, the red indicator will go off, and the green indicator stays on.
# Lithium-ion batteries, effectively protecting the safety of the battery and extending its service life
# Bracket available for angle adjustment. Reflective harness and rainproof design; anti-skid handle, working head and base
# Rated voltage: 3.7 V
# Battery capacity: 6000 mAh
# Discharge time: High power mode: 6 h; low power mode: 3 h
# Recharge time: 4 ~ 7 h
Precautions:
# Never throw the product into water or fire.
# Prevent the product from falling or impacting with hard objects, and avoid scratching or crushing the product.
# If the membrane switch is damaged, replace it immediately to prevent foreign materials from entering.
# The battery is not fully charged upon delivery. Before using the light for the first time, be sure to charge it continuously for more than 12 hours.
# Fully charge and discharge the battery at an interval of at least 6 months. When the battery is used up, please charge it in time to avoid over-discharge.
# Never charge the battery in thundery, rainy or humid conditions; otherwise the appliance or the internal electrical components of power supply would get burnt.
# Always use a dedicated charger. After charging is completed, unplug the charger in time, otherwise it may lead to short circuit or explosion.
# The operating temperature is recommended to be within 0 ~ 26°C, and the allowable operating temperature should be within -10 ~ 40°C. Exceeding the limit would reduce the service life of the product, damage it or even lead to personal injury
Made in China
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan