Mesin Buka Baut Angin 01132 - 1" Air Impact Wrench (8" Anvil) Sata

Mesin Buka Baut Angin 01132 - 1" Air Impact Wrench (8" Anvil) Sata


Three months warranty, pneumatic tools warranty terms, please see 'Introduction'
Special note Noise level is A sound pressure level. Working pressure refers to the dynamic pressure measured at the product inlet when the product is idling. Tightening bolt capacity refers to standard torque that meets the specifications of DIN267 grade 8.8 bolts
MADE IN China
Output specification 1"square-head
Operating torque（N·M）2300
Maximum reverse torque（N·M）2900
Idle speed（RPM）4700
Tightening bolt capacity M33
Output shaft length 8"
Average air consumption（CFM）16
Noise level dB（A) 110
Length（mm）537
Width（mm）123.5
Height（mm）176
Net Weight（kg）12.4
Air Inlet Size 1/2"
Minimum endotracheal diameter（mm）12.5
Working air pressure（KGF/CM2）8
Introduction
◆ Maximum output torque of 2900 N·m, maximum bolt tightening capacity of M33 (S50 socket).
◆ Suitable for the removal and installation of tires of large passenger vehicles as well as the removal, installation and repair of large mechanical equipment.
◆ Main parts made through the vacuum thermal treatment and ultra-low temperature quenching, featuring high hardness, toughness and wear resistance and long service life.
◆ Easy and flexible to use, greatly reducing the labor intensity
◆ 8" output shaft (01132) suitable for removal and installation of tires of large passenger vehicles
◆ 2" output shaft (01132S) suitable for operation in a confined space
- Non-warranty scope
◆ The air tools without the SATA trademark are not covered under free warranty. Any damage caused by abnormal use is not covered under free warranty.
◆ The wears caused by the product fatigue due to continuous use are not covered under free warranty.
◆ If the product has rust, plating peeling off, surface scratches, or broken plastic handles after use, it will not be repaired or replaced under warranty.