RED HIGH GLOSS
Atur jumlah dan catatan
Stok: Sisa 10
Subtotal
Rp47.121.300
SB Acoustics Speaker Kits RINJANI - RED HIGH GLOSS, COMPLETE
Rp47.121.300
Pilih warna: RED HIGH GLOSS
Pilih variasi: COMPLETE
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: KITS
The RINJANI is a 2½-way floor standing speaker kit built with top-line SATORI drivers. Each speaker is equipped with two SATORI 6½″ Papyrus cone midwoofers and the famous SATORI TW29R Ring-dome tweeter.
Mount Rinjani is a breathtakingly beautiful active volcano on the island of lombok, Indonesia. The volcano is know to display dramatic eruptions with plumes of lava and ash. The RINJANI kit is designed to deliver transparent and dynamic sound reproduction.
The RINJANI’s faceted baffle is specially designed to reduce high frequency diffraction and yields superb imaging qualities. A further 7° reclined cabinet ensures time alignment resulting in sublime staging and pin point placement in instruments. The quality crossover lives in it’s own sealed chamber in the bottom of the speaker with a slanted divider to diminish standing waves.
The cabinet is masterfully crafted from 18 mm MDF with internal bracing to distribute cabinet vibrations and lower sound coloration. Unwanted reflections are minimized by wedge shaped inner rear walls. The RINJANI also has dual ports at the back to distribute port resonance evenly and lower compression.
Drivers
Satori TW29R
6½″ Satori MW16P-8
Specs
Frequency range: 42-25000 Hz +/-3dB
Sensitivity ( 2.83V/1m ): 89 dB
Nominal impedance: 4 Ω
Max SPL: 107 dB
Recommended amplifier: 50-200 W
Cross-over frequency: 3000 Hz
Enclosure type: Bass reflex
Port tuning frequency: 35.5 Hz
Driver units: SATORI TW29R & 2 x 6½″ SATORI MW16P-8
Cabinet material: 18 mm MDF
Speaker dimension (HxWxD): 1010 x 190 x 464 mm ( 39.72 x 7.48 x 18.27 inch )
Net weight: Cabinet only 18.49 kg ( 40.76 lb ), full assy 22.42 kg ( 49.43 lb )
Mount Rinjani is a breathtakingly beautiful active volcano on the island of lombok, Indonesia. The volcano is know to display dramatic eruptions with plumes of lava and ash. The RINJANI kit is designed to deliver transparent and dynamic sound reproduction.
The RINJANI’s faceted baffle is specially designed to reduce high frequency diffraction and yields superb imaging qualities. A further 7° reclined cabinet ensures time alignment resulting in sublime staging and pin point placement in instruments. The quality crossover lives in it’s own sealed chamber in the bottom of the speaker with a slanted divider to diminish standing waves.
The cabinet is masterfully crafted from 18 mm MDF with internal bracing to distribute cabinet vibrations and lower sound coloration. Unwanted reflections are minimized by wedge shaped inner rear walls. The RINJANI also has dual ports at the back to distribute port resonance evenly and lower compression.
Drivers
Satori TW29R
6½″ Satori MW16P-8
Specs
Frequency range: 42-25000 Hz +/-3dB
Sensitivity ( 2.83V/1m ): 89 dB
Nominal impedance: 4 Ω
Max SPL: 107 dB
Recommended amplifier: 50-200 W
Cross-over frequency: 3000 Hz
Enclosure type: Bass reflex
Port tuning frequency: 35.5 Hz
Driver units: SATORI TW29R & 2 x 6½″ SATORI MW16P-8
Cabinet material: 18 mm MDF
Speaker dimension (HxWxD): 1010 x 190 x 464 mm ( 39.72 x 7.48 x 18.27 inch )
Net weight: Cabinet only 18.49 kg ( 40.76 lb ), full assy 22.42 kg ( 49.43 lb )
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan