Atur jumlah dan catatan
Stok Total: 50
Subtotal
Rp3.900.000
Power Rockford Fosgate Power T5002 - 2 Channel - Sca Auto
Rp3.900.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
75 watts RMS x 2 at 4 ohms
150 watts RMS x 2 at 2 ohms (250 watts RMS x 2 at 1 ohm)
300 watts RMS x 1 in bridged mode (at 4 ohms)
500 watts RMS x 1 in bridged mode (at 2 ohms)
1-ohm stable (2-ohm stable in bridged mode)
CEA-2006 compliant
Tri-way capable (Tri-Way crossover required)
requires 1/0-gauge power and ground leads — wiring and hardware not included with amplifier
variable high-/low-pass filters (40-400 Hz, switchable from 12 to 24 dB/octave)
Para-Punch bass EQ (0-18 dB with variable center frequency between 35-70 Hz) with wired remote control
MOSFET power supplies and outputs
MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability.
TOPAZ noise-killing differential inputs eliminate 80% of ground loop noise between the head unit and the amp.
TRANS-ana circuitry keeps preamp signal clean
NOMAD advanced protection circuitry monitors temperature, voltage, current and impedence, and provides "intelligent" shut-down protection without limiting system performance.
fan cooled
preamp outputs for easy connection to a second amplifier
fuse rating: 100 amps
dimensions: 17-15/16"W x 2-11/16"H x 12-3/4"D
MFR # 4FRT5002
2-Channel amplifier with a removable cover and installed 100A ANL fuse
2 Allen-head screws (installed)
One 3/16" Allen wrench
Four 3/4" self-tapping screws
Two 1/2" self-tapping screws
Remote Punch Bass controller
Remote controller mounting bracket
Two 1/0-gauge to 4-gauge adapters
16.5' Flat remote cable (has RJ-45 plugs on both ends)
Installation & Operation manual
Factory Refurbished Warranty sheet
150 watts RMS x 2 at 2 ohms (250 watts RMS x 2 at 1 ohm)
300 watts RMS x 1 in bridged mode (at 4 ohms)
500 watts RMS x 1 in bridged mode (at 2 ohms)
1-ohm stable (2-ohm stable in bridged mode)
CEA-2006 compliant
Tri-way capable (Tri-Way crossover required)
requires 1/0-gauge power and ground leads — wiring and hardware not included with amplifier
variable high-/low-pass filters (40-400 Hz, switchable from 12 to 24 dB/octave)
Para-Punch bass EQ (0-18 dB with variable center frequency between 35-70 Hz) with wired remote control
MOSFET power supplies and outputs
MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability.
TOPAZ noise-killing differential inputs eliminate 80% of ground loop noise between the head unit and the amp.
TRANS-ana circuitry keeps preamp signal clean
NOMAD advanced protection circuitry monitors temperature, voltage, current and impedence, and provides "intelligent" shut-down protection without limiting system performance.
fan cooled
preamp outputs for easy connection to a second amplifier
fuse rating: 100 amps
dimensions: 17-15/16"W x 2-11/16"H x 12-3/4"D
MFR # 4FRT5002
2-Channel amplifier with a removable cover and installed 100A ANL fuse
2 Allen-head screws (installed)
One 3/16" Allen wrench
Four 3/4" self-tapping screws
Two 1/2" self-tapping screws
Remote Punch Bass controller
Remote controller mounting bracket
Two 1/0-gauge to 4-gauge adapters
16.5' Flat remote cable (has RJ-45 plugs on both ends)
Installation & Operation manual
Factory Refurbished Warranty sheet
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan