LOCTITE 518 Gasket Sealant Flange Sealant Medium Strength 50ml 50 ml

LOCTITE 518 Gasket Sealant Flange Sealant Medium Strength 50ml 50 ml LOCTITE 518 is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings. Semi-flexible, medium-strength anaerobic flange gasket For active and inactive rigid metal flanges Cures through minor surface contamination Adapts to flange surface irregularities and gaps up to 0.25 mm Gel-type consistency Seals instantly against low pressure Reduces inventory costs – no need for large inventory of cut gaskets Resists high pressure when fully cured No compression set or misaligned gaskets Easy to automate Reduces process costs – eliminates manual assembly of conventional gaskets NSF P1 Reg. No. 123758 Technical Information Application Method Dispense System, Manual Applications Rigid Assembly Gasketing, Sealing Color Red Cure Type Anaerobic Cure Fixture Time, Steel 25.0 min. Gap Fill, Unprimed 0.25 mm Key Characteristics Fluorescent, For machined, rigid flanges, Immediate Low Pressure Sealing, Strength: Medium Strength, Surface Contamination-Tolerant, Thixotropic Operating Temperature -55.0 - 150.0 °C (-65.0 - 300.0 °F ) Physical Form Gel Specific Gravity, @ 25.0 °C 1.1 Substrates Metal: Aluminum, Metal: Iron - Cast Iron, Metal: Passive Metal, Metal: Steel Technology Acrylic Viscosity 750000.0 mPa·s (cP)