Splicer Ilsintech KF4 Fusion Splicer Swift Ilsintech KF4 Fiber Optik

Splicer Ilsintech KF4 Fusion Splicer Swift Ilsintech KF4 Fiber Optik

Deskripsi Splicer Ilsintech KF4 Fusion Splicer Swift Ilsintech KF4 Fiber Optik
Category Description
Fiber alignment
IPAAS, Active V-Groove Alignment

Applicable type of fibers
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable

Fiber count
Single fiber

Applicable fiber dimensions
Cladding diameter : 125μm, Coating diameter : 150μm~3mm

Fiber setting and cleaved length
0.20in to 0.63in

Splicing modes
Splice mode: 300, Heat mode: 100

Typical splice Loss
SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB

Return loss
> 60dB

Splicing time
Typical 7sec with SM

Sleeve heating time
Typical 13sec with IS-60 mode, IS-60 sleeve

Applicable protection sleeve
2.4in, 1.5in and micro sleeves

Storage of splice result
Data: 5,000ea Up to, Image: 5,000ea Up to

Tension test
1.96N to 2.25N

Operating condition
Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

Storage condition
Temperature: 40°F~176°F, Humidity: 0~95%

Dimension
4.9(W) x 7.4(L) x 3.0(H)in (Without rubber protector)

Weight
5.3lb(Including battery)

Viewing method and display
2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor
Fiber view and magnification
X/Y: 130X , Max: 260X
Power supply
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger

No. of splice cycles with battery
Typical 200 cycles
Electrode life
21,000 splices
Blade life
75,000
Terminals
USB