Arducam 16MP Autofocus Camera Module Raspberry Pi or Jetson Nano Best

𝐍𝐎𝐓𝐄 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀


SKU KE3023

Specfication Comparison Chart

Sensor Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size mm diagonal (Type 1/ )
Output RAW10/8, COMP8
Lens Autofocus; f/1.75; EFL 4.28; FoV 80°; Focus Range 10 cm ~ infinite
IR cut Filter Integrated
Tripod mount 1/4”-20
Enclosure ABS, also compatible w/ camera module v1 v2.
Ribbon Cable Length 150mm

Safety instructions

Before connecting, you should always power the Raspberry Pi off and remove the power supply first.
Make sure the cable on the camera board is locked in place.
Make sure the cable is correctly inserted in the Raspberry Pi board’s MIPI CSI-2 connector.
Avoid high temperatures.
Avoid water, moisture, or conductive surfaces while in operation.
Avoid folding, or straining the flex cable.
Avoid cross-threading with tripods.
Gently push/pull the connector to avoid damaging the printed circuit board.
Avoid moving or handling the printed circuit board excessively while it’s in operation.
Handle by the edges to avoid damages from electrostatic discharge.
Where the camera board is stored should be cool and as dry as possible.
Sudden temperature/humidity changes can cause dampness in the lens and affect the image/video quality.

*Support NVIDIA Jetson board

Sources

Jangan lupa tanyakan stok terlebih dahulu sebelum order ya
Kami pastikan barang yang kami kirim sesuai foto dan deskripsi iklan.
Untuk Info Lebih Lanjut bisa tanyakan lewat fitur Chat tokopedia,
Transaksi yang masuk hari Minggu dan Hari Libur Nasional akan kami proses keesokan harinya,
Selamat berbelanja di toko kami.