Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
Finish Line Rust Remover / Cairan penghilang karat / sepeda
Rp270.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Finish Line Rust Remover Sepeda Chill Zone 17oz penghilang karat cairan
cairan finishline yang mampu menghilangkan karat, sangat bagus di gunakan di sepeda maupun barang lainya yang berkarat
Chill Zone is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day.
A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.
How to use: Simply spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray longer (30-60 seconds) for maximum freezing effect and then wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.
cairan finishline yang mampu menghilangkan karat, sangat bagus di gunakan di sepeda maupun barang lainya yang berkarat
Chill Zone is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day.
A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.
How to use: Simply spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray longer (30-60 seconds) for maximum freezing effect and then wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan