Access Point Aruba RAP109 RAP-109

Aruba RAP-109 Remote Access Point Key Features: Dual band 802.11n 2.4GHz and 5GHz 2x2 MIMO 300 Mbps Wireless Radio Specifications AP type: Dual-radio, dual-band 802.11n indoor Software-configurable dual radio supports 2.4 GHz and 5 GHz 2x2 MIMO with two spatial streams and up to 300 Mbps wireless data rate Supported frequency band (country-specific restrictions apply): -- 2.4000 GHz to 2.4835 GHz -- 5.150 to 5.250 GHz -- 5.250 to 5.350 GHz -- 5.470 to 5.725 GHz -- 5.725 to 5.875 GHz Available channels: Managed by Aruba Instant or Mobility Controller, depending upon the configured regulatory domain Supported radio technologies: -- 802.11b: Direct-sequence spread-spectrum (DSSS) -- 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM) -- 802.11n: 2x2 MIMO with two spatial streams Supported modulation types: -- 802.11b: BPSK, QPSK, CCK -- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM Transmit power: Configurable in increments of 0.5 dBm Maximum (aggregate) transmit power (limited by local regulatory requirements): -- 2.4-GHz band: +21 dBm -- 5-GHz bands: +21 dBm Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for improved receiver performance Cyclic delay diversity (CDD) for improved downlink RF performance Short guard interval for 20-MHz and 40-MHz channels Space time-blocking code (STBC) for increased range and improved reception Supported data rates (Mbps): -- 802.11b: 1, 2, 5.5, 11 -- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 -- 802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps) 802.11n high-throughput (HT) support: HT 20/40 802.11n packet aggregation: A-MPDU, A-MSDU Power Supported power sources: -- 802.3af (PoE) or 802.3at (PoE+) on uplink Ethernet port Note: When using PoE, the USB port will be enabled only when an 802.3at-compliant source is used -- 12 volts from external power adapter (sold separately) Maximum power consumption: -- Without USB device connected: Antennas RAP-108: