NEW Schiit Magni Unity Headphone Amplifier Amp with Modular DAC Option - Black, Internal DAC

Schiit Magni Unity
Pre-order sekitar 4-6 minggu.
Barang Baru, Dijamin 100% Original Schiit USA

Power: plenty for all headphones except a handful of the hardest-to-drive ones (we’re talking HE6, Tungsten, stuff like that)
Noise: inaudible on all headphones and IEMs
Distortion: unmeasurable at normal listening levels; 1000x lower than the typical headphones you're using
Heat: amp gets slightly warm without DAC card, moderately warm with DAC card; this is fine, we have made much hotter-running stuff that lasts farrrrrr past the warranty
Size: extremely desk-friendly

OTHER SPECS

Frequency Response: 20Hz-20Khz, +/-0.01dB

Output Power

Maximum Power, 16 ohms: 3.0W RMS per channel
Maximum Power, 32 ohms: 2.5W RMS per channel
Maximum Power, 50 ohms: 1.5W RMS per channel
Maximum Power, 300 ohms: 415mW RMS per channel
Maximum Power, 600 ohms: 220mW RMS per channel

THD+N

Low Gain: Less than 0.0001% (-116dB) at 2V RMS into 300 ohms
High Gain: Less than 0.0003% (-108dB) at 2V RMS into 300 ohms

IMD

Low Gain: Less than -110dB at 4V RMS into 300 ohms, CCIF
High Gain: Less than -108dB at 4V RMS into 300 ohms, CCIF

SNR

Low Gain: Greater than 122dB, referenced to 2V RMS
High Gain: Greater than 112dB, referenced to 2V RMS

Crosstalk

Less than -80dB, 20 Hz-20 kHz, 300 ohm load

Output Impedance

SE ¼” TRS output: less than 0.1 ohms
Preamp output: 75 ohms

Input Impedance: 50k ohms

Gain: 0.3 (-10dB), 1 (0db) or 5 (15db)

Topology: Fully discrete, DC coupled, current feedback, highly linear open-loop with low loop feedback

Protection: Failsafe DC power input and muting relay, overcurrent sensing and output lift, DC servo

Power Supply: 100% linear supply with “Wall wart” style 14-16VAC transformer, regulated +/-17V rails with over 8,000uF total filter capacitance

Power Consumption: 2W idle, 12W max