Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp6.100.000
Landtek HM-6580 Digital Hardness Tester Portable metal hardness HM6580
Rp6.100.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: LANDTEK
HM-6580 Digital Leeb Hardness Tester HM6580 Durometer
Applications:
Applicable to Die cavity of molds, Inspection of bearing and other mass produced parts on a production line, Failure analysis of pressure vessel, steam generator and other equipment, Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces, Testing surface of a small hollow space, Material identification in the warehouse of metallic materials, Rapid testing in large range and multi-measuring areas for large-scale work piece.
Features:
* Palm size for narrow space.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS,HL.
* Large memory could store 50 groups including single measured value, impact direction, material and hardness scale etc.
* User recalibration function allowed.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Manual or automatic shut down.
* Low battery indication.
Standard Accessories:
1. Main Unit
2. Standard Test Block
3. Measurement Sensor
4. Carrying Case
5. Operation Manual
6. Small Support Ring
7. Cleaning brush
Case Material Aluminum Alloy
Display LCD
Materials 9 different common materials ( Steel & Cast Steel, Metallurgy tool steel, Forged Steel, Gray Cast Iron, Nodular Cast Iron, Cast Aluminum, Brass, Bronze, Copper )
Measuring range (170-960) HLD\(20-68)HRC\(19-65)HB\(80-967)HV\(30-100)HS\ (13-100)HRB
Accuracy ±8HLD(HLD=800)
Repeatability ±6HLD(HLD=800)
Conversion HL-HRC-HRB-HB-HV-HSD
Measuring Direction 360°
Impact device D Will handle,
Radius of Measured Workpiece Rmin=50mm ( For non-conventional Supporting ring Rmin=10mm )
Min. Thickness of Workpiece 3mm
Min. Thickness of Hardened Layer 0.8mm
Working Conditions Temperature: 0 ~ 40 °C
Humidity: ≤ 90 %
Power supply 2 x 1.5 V AA size (UM-3) battery
Applications:
Applicable to Die cavity of molds, Inspection of bearing and other mass produced parts on a production line, Failure analysis of pressure vessel, steam generator and other equipment, Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces, Testing surface of a small hollow space, Material identification in the warehouse of metallic materials, Rapid testing in large range and multi-measuring areas for large-scale work piece.
Features:
* Palm size for narrow space.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS,HL.
* Large memory could store 50 groups including single measured value, impact direction, material and hardness scale etc.
* User recalibration function allowed.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Manual or automatic shut down.
* Low battery indication.
Standard Accessories:
1. Main Unit
2. Standard Test Block
3. Measurement Sensor
4. Carrying Case
5. Operation Manual
6. Small Support Ring
7. Cleaning brush
Case Material Aluminum Alloy
Display LCD
Materials 9 different common materials ( Steel & Cast Steel, Metallurgy tool steel, Forged Steel, Gray Cast Iron, Nodular Cast Iron, Cast Aluminum, Brass, Bronze, Copper )
Measuring range (170-960) HLD\(20-68)HRC\(19-65)HB\(80-967)HV\(30-100)HS\ (13-100)HRB
Accuracy ±8HLD(HLD=800)
Repeatability ±6HLD(HLD=800)
Conversion HL-HRC-HRB-HB-HV-HSD
Measuring Direction 360°
Impact device D Will handle,
Radius of Measured Workpiece Rmin=50mm ( For non-conventional Supporting ring Rmin=10mm )
Min. Thickness of Workpiece 3mm
Min. Thickness of Hardened Layer 0.8mm
Working Conditions Temperature: 0 ~ 40 °C
Humidity: ≤ 90 %
Power supply 2 x 1.5 V AA size (UM-3) battery
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan