Output waveform: pure sine inverter Peak output power: 2000W/3000W/4000W/5000W/6000W/8000W Continuous output power: 1000W/1500W/1800W/2500W/3000W/4000W Classic best-selling models: low voltage, high voltage, over temperature, overload protection, isolation circuit, strong shock resistance, constant voltage stable output, low interference
Basic knowledge of inverter use
The installation and commissioning of this equipment shall be carried out by professional electrical maintenance personnel who are familiar with the structure and operation hazards of this device. Failure to observe this precaution may cause physical injury. (1) Do not connect this device to a civilian electrical box, such as a home line. (2) Keep the inverter away from water, avoid water drops on the machine or splash on it, and do not insert or pull the plug with wet hands. (3) Keep the inverter in a cool environment, the appropriate temperature should be 10 ℃ ~ 50 ℃, avoid direct sunlight and heat vents. (4) Keep the inverter away from flammable substances or places where flammable gas is accumulated. (5) After prolonged use, the inverter will generate heat, so avoid materials close to heat. (6) Ensure that the vents are smooth and have good heat dissipation. (7) High voltage is dangerous, please do not open the machine. (8) Use the appropriate type of wire to avoid the wire melting due to excessive inverter current. (9) Make sure that the inverter is properly connected to the battery, otherwise the fuse of the inverter will be blown. Turn off the switch when the machine is not in use. (10) Turn off the switch before cleaning, and clean with a dry cloth. Do not use a damp cloth or cleaning agent.