New Matek MATEKSYS F405 WING V2 STM32F405RGT6 Flight Controller Built-in

Selamat Datang di toko kami, kami menjual produk produk import berkualitas tinggi dan kami membutuhkan waktu 20-30hr utk proses pengiriman, silahkan langsung di order kak,

Quantity : 1 pcs
Wheelbase : Bottom Plate
Size : 54 x 36 x 13 mm
Technical parameters : Value 2
Model Number : Matek F405 WING V2
For Vehicle Type : Airplanes
Tool Supplies : Assembly Category
Four-wheel Drive Attributes : Assemblage
Remote Control Peripherals/Devices : ESC
Upgrade Parts/Accessories : Flight Controller
RC Parts & Accs : Flight Controller
Material : Composite Material
Origin : Mainland China
Recommend Age : 14+y
Use : Vehicles & Remote Control Toys


FC Specifications

MCU: STM32F405RGT6, 168MHz , 1MB Flash

IMU: ICM42688-P

Baro: DPS310

OSD: AT7456E

Blackbox: MicroSD card slot

6x UARTs, 1x Softserial_Tx option(INAV)

10x PWM outputs

2x I2C

3x ADC (VBAT, Current, RSSI)

Built in inverter for SBUS input

USB Type-C(USB2.0)

FC Firmware

ArduPilot: MatekF405-Wing (ArduPlane 4.4 or newer)

INAV: MATEKF405SE (INAV 6.0 or newer)

PDB

Input voltage range: 9~30V (3~6S LiPo) w/TVS protection

Current Senor: 220A, 3.3V ADC(INAV scale 150, ArduPilot 66.7A/V)

Sense resistor: 100A continuous, 220A peak

Battery Voltage divider 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)

BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

Continuous current: 2 Amps

BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal ect.

Continuous current: 2 Amps

12V option with Jumper pad

for stable 9V/12V output, input voltage should > output voltage +1V

BEC Vxoutput

Designed forServos

Voltage ad