New GPU Video Card Dock Laptop to External Graphic Card Docking Station for Dual Screen Notebook Computer

installation steps:

1. Align the side panel with the bottom panel according to the diagram and tighten the two screws.

2. Align the main board with the four pillars of the bottom plate according to the direction shown in the figure, and tighten the four screws.

3. Insert the graphics card into the graphics card slot.

4. Tighten the two screws on the top of the graphics card.

5. Plug the 24pin+4pin power cable of the power supply into the mainboard power interface.

6. Insert the graphics card cable into the PCIEX8 socket. There is no distinction between the notebook and the graphics card slot port.

7. Connect the graphics card cable to the PCI-Express port of the notebook, and check that each port is not inserted obliquely.

8. Turn on the power supply of the graphics card, turn on the power of the notebook, turn it on, and install the driver. Shut down and take it off, you need to turn off the notebook first, then turn off the power supply of the graphics card, and then take it out.