[Hot] Smoothieboard 5X V1.0 ARM Open Source Mainboard For 3D

[Hot] Smoothieboard 5X V1.0 ARM Open Source Mainboard For 3D More info. can refer to here.Descriptions:Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community to run the Smoothieware firmware.Its main design goals are :Uses as powerful hardware as possible at the timeCan control several machine types ( 3D printers, lasers, CNC mills/routers )Easy to setup and useEasy to do weird, new and exciting things withEasy to develop forThis page is for v1, the first version of the Smoothieboard hardware.MicrocontrollerThe board uses the LPC1769 microcontroller, an ARM Cortex-M3 chip :32-bit architecture120Mhz frequency512kB ROM ( program space )64kB RAM ( execution memory )Compared to lots of other boards, this allows for faster/smoother movement, more features and more extensibility.The board runs the Smoothie firmware, which has been designed and perfected to take best advantage of the hardware, to make the board easy to configure and use, and to add cool features. EditUSBThe USB interface connects to a host ( your computer ), and can be used :Via its USB/MSD ( Mass storage ) interface to directly access the SD card in the board ( read, edit, copy/paste files )Via its USB/CDC ( Serial ) interface to send commands ( like Gcodes ) for execution, for example using host softwareThis allows for pretty neat things like :Editing the configuration without having to edit source file or reflash the firmwareDropping Gcode files to the board and executing themDropping firmware upgrade files to the board for easy 1381544