MPPT 60A/150V - eTRACER ET6415BND - EPEVER Solar Charge Controller

eTRACER ET-6415BND (MPPT 60A, PV Max.150V)

ELECTRONIC Protections :
- PV short circuit protection
- PV over current protection
- PV reverse polarity protection
- Battery over voltage protection
- Battery over discharge protection
- Battery reverse polarity protection
- Load overload protection
- Load short circuit protection
- Battery overheating protection
- Controller overheating protection

ELECTRICAL Parameters :
1. Model : eT-6415BND (eTracer Series)
2. Manufacturer : EPEVER
3. Charging Mode : MPPT (Maximum Power Point Tracking)
4. Rated System Voltage : 12V/24V/36V/48VDC (auto work)
5. Rated Battery Current : 60A
6. Rated Load Current : 60A
7. MPP Voltage Range : VBAT +8V ~ 68V
8. Max. PV Open Circuit Voltage : 150V (at minimum operating environment temperature); 138V (at 25 environment temperature)
9. Max. PV Input Power : 800W (12V) ; 1600W (24V) ; 2400W (36V) ; 3200W (48V)
10. Self-consumption : 1.4W ~ 2.6W
11. Tracking Efficiency : 99%
12. Peak Conversion Efficiency : 98%
13. Equalize Charging Voltage : Sealed 14.6V, Flooded 14.8V, User defined : 9V~17V
14. Boost Charging Voltage : Gel 14.2V, Sealed 14.4V, Flooded 14.6V, User-defined : 9V~17V
15. Float Charging Voltage : Gel/Sealed/Flooded : 13.8V, User-defined : 9V~17V
16. Low Voltage Reconnect Voltage : Gel/Sealed/Flooded : 12.6V, User-defined : 9V~17V
17. Low Voltage Disconnect Voltage : Gel/Sealed/Flooded : 11.1V, User-defined : 9V~17V
18. Grounding : Common Negative

ENVIRONMENTAL Parameters :
1. LCD Temperature Range : -20℃ ~ +70℃
2. Working Temperature : -25℃ ~ +55℃
3. Storage Temperature Range : -30℃ ~ +85℃
4. Humidity Range : 95% NC
5. Enclosure Rating : IP20

MECHANICAL Parameters :
1. Overall Dimension : 449.1mm x 208mm x 107mm
2. Power Terminals : 2AWG/35mm2
3. Net Weight : 5.5kg
4. Mounting Hole : Φ10