Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp899.000
JYS Charging Dock And Storage Untuk Quest 3 / Tempat Cas Dan Penyimpanan Utk Quest 3
Rp899.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Meta Quest Accesories
Sekilas tentang souvigameshop :
1. The most trusted Gaming shop in Indonesia since 2012
2. Kami memiliki team after sales yang dapat menjawab semua pertanyaan anda secara online!
3. Harga special untuk yang Langganan souvigameshop :D tanya saja ke admin kami!
3. Gratis Ongkir dan Cashback selalu tersedia!
5. Kami telah mendapatkan review positif dari 100k++ customer online kami ! Yuk kalau masih ragu silahkan di cek apa kata customer kami!
Review pelanggan puas kami:
https://www.tokopedia.com/souvigameshop/review
product description:
* Use magnetic charging to quickly and conveniently charge one VR helmet and two VR handles at the same time. The charger is equipped with overvoltage, overcharge, overcurrent and circuit protection
* Unique shape designed for fashion-conscious gamers.
Built-in LED indicators clearly show the charging status of each device
*RGB lighting mode creates a fantastic gaming atmosphere.
1. Question: Why do I need to use this charger?
A: The main unit and the handle can be placed neatly and centrally to avoid clutter and facilitate charging.
2. Question: Do I have to use the original charging head that comes with VR?
A: No, as long as there is a charging head with PD protocol, it can support fast charging. Ordinary charging heads do not have fast charging function.
3. Question: Why does the green light flash when I remove the controller or VR while charging?
A: Because the system detects whether the device is fully charged by detecting the charging current. If the charging current is less than 50mA or 100mA, the system will determine that the charging is saturated and the green light will be on. On the contrary, it will be judged that the charging is in orange. When the handle is removed, the current directly decreases to 0. The system determines that it is fully charged and the green light will be on.
4. Question: Why do the indicator lights and ambient lights go out and then light up again when placing the VR?
A: Because there is a reset switch, when you place the VR, the switch will be pressed down and switched to the fast charging function; so you see the system light turn off and then on again.
1. The most trusted Gaming shop in Indonesia since 2012
2. Kami memiliki team after sales yang dapat menjawab semua pertanyaan anda secara online!
3. Harga special untuk yang Langganan souvigameshop :D tanya saja ke admin kami!
3. Gratis Ongkir dan Cashback selalu tersedia!
5. Kami telah mendapatkan review positif dari 100k++ customer online kami ! Yuk kalau masih ragu silahkan di cek apa kata customer kami!
Review pelanggan puas kami:
https://www.tokopedia.com/souvigameshop/review
product description:
* Use magnetic charging to quickly and conveniently charge one VR helmet and two VR handles at the same time. The charger is equipped with overvoltage, overcharge, overcurrent and circuit protection
* Unique shape designed for fashion-conscious gamers.
Built-in LED indicators clearly show the charging status of each device
*RGB lighting mode creates a fantastic gaming atmosphere.
1. Question: Why do I need to use this charger?
A: The main unit and the handle can be placed neatly and centrally to avoid clutter and facilitate charging.
2. Question: Do I have to use the original charging head that comes with VR?
A: No, as long as there is a charging head with PD protocol, it can support fast charging. Ordinary charging heads do not have fast charging function.
3. Question: Why does the green light flash when I remove the controller or VR while charging?
A: Because the system detects whether the device is fully charged by detecting the charging current. If the charging current is less than 50mA or 100mA, the system will determine that the charging is saturated and the green light will be on. On the contrary, it will be judged that the charging is in orange. When the handle is removed, the current directly decreases to 0. The system determines that it is fully charged and the green light will be on.
4. Question: Why do the indicator lights and ambient lights go out and then light up again when placing the VR?
A: Because there is a reset switch, when you place the VR, the switch will be pressed down and switched to the fast charging function; so you see the system light turn off and then on again.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan