Breakout board CNC 4 axis USB Motion Control Card Mach3 E Cut

4 Axis E-Cut USB MACH3 Motion Control Card CNC Interface Breakout Driver Board 1. Supports all Mach3 versions,including the Mach3R3.042.040 version. 2.Supporting Windows series,no need to install any USB drivers and plug. 3. Full support for USB hot-swappable,the card is Monitoring USB connection status at any the operation of Mach3, it can be reconnect automatically after disconnect. 4. Supports 4 axis linkage,including point to point move. 5. Supporting auto tool zero,electronic handwheel and software limit,return difference eliminating. 6. 120M working frequency,Maximum step-pulse frequency is 1MHz,Perfectly drive servo and stepper motor in three ways: pulse/direction,CW/CCW,AB quadrature output. 7. Status indicator LED can be usefulto show the USB connection,and working status by flashing. 8. 16 general-purpose inputs,PNP or NPN input status can be configured in Mach3. 9. 8 electronic switch outputs.Darlington open-drain output. 10. Measures real-time spindle speed(Support the Hall element and quadrature encoder speed masurement,etc.)and spindle speed can be observed in March3 to perfectly support the application of spindle.Perfectly support the lathe spindle applications and other occasions,whitch requires precise spindle speed. 11. Use external 12V-24V DC power supply to isolate USB and external port,and to make the system more stable. 12. 11 high-speed optical couplers with 10MHz,and 24 general optical couplers(Total optocoupler reach to 35)for isolating all of the input/output signals,isolation voltage up to 2KV 13. 2 spindle export interface:accurate 0-10V analog output,supporting converter to control spindle drive;PWM output with 5V drop-down,providing PWM speed drive,CW/CCW output,puls/dir output and quadrature output for servo or stepping driver 14. The output spind