VKB GLADIATOR NXT STAND ALONE MODULE GNX USB CONTROLLER HID MAIN

HARAP TANYAKAN STOK TERLEBIH DAHULU SEBELUM DIORDER REGARDS, SOS Sport Online Shop Description Part of the modular GNX series of VKB controllers. GNX USB Controller (HID-Main) Provides USB connectivity for GNX modules to the PC (by default, GNX modules interconnect via GNX Module-to-Module Interface Cable to each other and Gladiator NXT, but not directly to the PC) Required when using GNX Modules as stand-alone devices Required when the total amount of axes per GNX device combo exceeds eight: MS Windows DirectInput allows for only 8 axes per controller You’ll need 1x GNX-HID USB controller if there are more than 8 axes in your GNX configuration (and another one if there are more than 2×8=16 axes) Example: For 8 axes, you do not need any GNX-HID USB controller; however, for 9 to 16 axes you’ll need 1x GNX-HID USB controller, and for 17 to 24 axes you’ll need 2x GNX-HID USB controllers, and so on Features NJoy32 platform 32-bit ARM Controllers inside base and grip Plug amp; Play with Driver-Free Installation (Recommended for Most Users) Firmware Upgrade via USB Onboard Memory for Storing Profiles Optional Programming Software Available (For Advanced Users) USB 2.0 HID controller Type-C connection Connectivity USB 2.0 Content PCB board Set of screws USB Type-C cable (180 cm / 6′) Transparent rubber lens Warranty: 2 Years Compatible with: GNX THQ/V GNX FSM-GA GNX SEM/V