5.0/ 5.0
100% pembeli merasa puas
62 rating • 23 ulasan
5(61)98.39%
4(1)1.61%
3(0)0%
2(0)0%
1(0)0%
SOLDER PCB
Atur jumlah dan catatan
Stok: Sisa 4
Subtotal
Rp599.000
TOFU60 REDUX Alumunium 60 % Mechanical Keyboard CASE - KBDFans - SOLDER PCB
Rp599.000
Pilih warna: SOLDER PCB
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
### READY STOCK LANGSUNG KIRIM ###
CASE ONLY TANPA BRASS WEIGTH (Variant Terpisah/add on)
SUPPORT PCB WOOTING 60, DZ60, GK, POKER dan sebagai nya
SPEC CASE
Case: Aluminum
Structure: Tray-mount
Compatible with most 60% PCB, including DZ60 rev3.0, DZ60 RGB-ANSI, DZ60RGB V2 PCB, Wooting 60HE PCB, etc.
Weight: ~1156g
Typing angle: 7 degree
Comparison with Tofu60 1.0
SPEC BRASS WEIGH
Weight bar: Sandblasted brass
SPEC SOLDER PCB
1.6mm thickness, solder custom layout, non flex cut
Sandblasted brass weight is added internal, the weight is increased
Replace the round rubber feet with long strip rubber feet
Two detachable golden stand-offs located in the middle and bottom of the case interior
DISCLAIMER
1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.)
2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks,stain, dent, sand mark, scratch, etc.)
3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners.
4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's.
CASE ONLY TANPA BRASS WEIGTH (Variant Terpisah/add on)
SUPPORT PCB WOOTING 60, DZ60, GK, POKER dan sebagai nya
SPEC CASE
Case: Aluminum
Structure: Tray-mount
Compatible with most 60% PCB, including DZ60 rev3.0, DZ60 RGB-ANSI, DZ60RGB V2 PCB, Wooting 60HE PCB, etc.
Weight: ~1156g
Typing angle: 7 degree
Comparison with Tofu60 1.0
SPEC BRASS WEIGH
Weight bar: Sandblasted brass
SPEC SOLDER PCB
1.6mm thickness, solder custom layout, non flex cut
Sandblasted brass weight is added internal, the weight is increased
Replace the round rubber feet with long strip rubber feet
Two detachable golden stand-offs located in the middle and bottom of the case interior
DISCLAIMER
1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.)
2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks,stain, dent, sand mark, scratch, etc.)
3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners.
4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's.
Ada masalah dengan produk ini?