5.0/ 5.0
100% pembeli merasa puas
3 rating • 2 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp1.000
LM358 LM 358 SMD SMT SOP SOP-8 DUAL OPAMP OP AMP - SQUARESOLID
Rp1.000
Foto hasil jepretan sendiri yah gan.
Harga untuk 1 pcs.
LM358 LM 358 SMD SMT SOP SOP-8 DUAL OPAMP OP AMP - SQUARESOLID
Datasheet: http://www.ti.com/product/LM358
Wide Supply Ranges
Single Supply: 3 V to 32 V
(26 V for LM2904)
Dual Supplies: 1.5 V to 16 V
(13 V for LM2904)
Low Supply-Current Drain, Independent of Supply Voltage: 0.7 mA Typical
Wide Unity Gain Bandwidth: 0.7 MHz
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters
Input Offset Voltage: 3 mV Typical
A Versions: 2 mV Typical
Input Offset Current: 2 nA Typical
Input Bias Current: 20 nA Typical
A Versions: 15 nA Typical
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V
(26 V for LM2904)
Open-Loop Differential Voltage Gain:
100 dB Typical
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535,
All Parameters are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
Harga untuk 1 pcs.
LM358 LM 358 SMD SMT SOP SOP-8 DUAL OPAMP OP AMP - SQUARESOLID
Datasheet: http://www.ti.com/product/LM358
Wide Supply Ranges
Single Supply: 3 V to 32 V
(26 V for LM2904)
Dual Supplies: 1.5 V to 16 V
(13 V for LM2904)
Low Supply-Current Drain, Independent of Supply Voltage: 0.7 mA Typical
Wide Unity Gain Bandwidth: 0.7 MHz
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters
Input Offset Voltage: 3 mV Typical
A Versions: 2 mV Typical
Input Offset Current: 2 nA Typical
Input Bias Current: 20 nA Typical
A Versions: 15 nA Typical
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V
(26 V for LM2904)
Open-Loop Differential Voltage Gain:
100 dB Typical
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535,
All Parameters are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
Ada masalah dengan produk ini?