Gmade GS02F BUFFALO 1/10 TS CRAWLER ADVENTURE KIT

Feature:
- STEEL LADDER FRAME
- ADJUSTABLE WHEELBASE: GS02F chassis allows three type of easy adjustment of wheelbase convert kit to use any type of 313 and 324mm custom bodies. (optional link kits are sold separately)
- FRONT WEIGHT BALANCE
- FRONT MOUNTED MOTOR: Able to use 540 or 550 size motor with cooling fan with option. The motor is designed to mounted in front of the chassis, so it can increases more tire traction to the front side.
- MULTIPLE BATTERY LOCATIONS
- CHASSIS MOUNTED SERVO SYSTEM WITH PANHARD BAR
The GS02F transmission is designed to look as a real 1:1 scale vehicle, and provides the best performance according to the driving situation.
The GS02F transmission is designed to rotate the front wheel faster than the rear wheel.
- BETTER STEERING RADIUS: Vehicles with overdrive on the front axle has an improved steering radius compared to non-overdrive vehicles, making it easier to control when driving on the rough surfaces.
- BETTER CLIMBING: Increasing of the tire traction allows the vehicle to pass through steep slopes and obstacles without lifting the front of the body upward.
- 2-SPEED HI/LO TRANSMISSION
- TORQUE TWIST REDUCE TRANSMISSION
- EASY ADJUST MOTOR MOUNT

Dual slipper clutch
All metal internal gears
Hardened carbon steel universal joints
GA44 AXLE
KINGPIN ANGLE: Keeping the scrub radius to a minimum to let your steering servo work at it's full potential and increases the steering efficiency.
HI STEER KNUCKLE ARM: By increasing the approach angle, you can over climb the obstacles more easily than a typical trial trucks.
ADJUSTABLE CASTOR
ZERO ACKERMAN STEERING
SD SCALER SHOCK ABSORBER
MT-1904 1.9 INCH M/T OFF-ROAD TIRE
1.9INCH NR01 BEADLOCK WHEEL
BUFFALO LEXAN BODY
STEALTH BODY MOUNT

Specification:
Width : 240mm
Height : 269mm
Height(with out roof rack) : 246mm
Length : 540mm
Wheel base : 313mm
Ground clearance : 77mm
Weight (no electronics) : 2.22kg

Require:
Radio System
Servo
ESC
Motor
Battery
Receiver