5.0/ 5.0
100% pembeli merasa puas
2 rating • 0 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 5
Subtotal
Rp75.000
Raspberry Pi RP2040 Dual Core Microcontroller
Rp75.000
Features and Specs:
1st Microcontroller Silicon designed by Raspberry Pi (Raspberry Pi Silicon)
Proven with Raspberry Pi Pico
Dual-Core, 32-bit ARM Cortex M0+ Processor
Flexible clock, configurable max to 133MHz
On-chip 264KB of SRAM
Support up to 16MB of external Flash (QSPI)
12 Channels of DMA (Direct Memory Access)
Ready with USB 1.1 PHY, supports Host and Device
Connected to the USB port and it will appear as USB Mass Storage by default, no driver is needed
Supports MicroPython, CircuitPython, C, C++, C alike in Arduino IDE Programming Language
Drag and Drop Program loading method, just like moving file in Windows Explorer
Peripheral rich:
30 GPIO (4 reserves for QSPI interface to external Flash IC)
26 multifunction 3.3V General Purpose I/O (GPIO)
23 GPIO are digital-only
5 x 12-bit ADC capable of 500Ksps, Analog to Digital Converter
4 x ADC extended to GPIO
1 x ADC tied to an internal temperature sensor
2 x UART (Universal Asynchronous Receiver/Transmitter)
2 x SPI (Serial Peripheral Interface)
2 x I2C (Inter IC)
16 x PWM (Pulse Width Modulation)
1 x Timer with 4 alarms
1 x Real Time Counter
2 x Programmable IO (PIO) blocks that can emulate high-speed interfaces such as SD card or VGA
3-pin ARM Serial Wire Debug (SWD) port
Accelerated floating-point libraries on-chip
Comprehensive SDK, software examples, and documentation
QFN-56 package:
1st Microcontroller Silicon designed by Raspberry Pi (Raspberry Pi Silicon)
Proven with Raspberry Pi Pico
Dual-Core, 32-bit ARM Cortex M0+ Processor
Flexible clock, configurable max to 133MHz
On-chip 264KB of SRAM
Support up to 16MB of external Flash (QSPI)
12 Channels of DMA (Direct Memory Access)
Ready with USB 1.1 PHY, supports Host and Device
Connected to the USB port and it will appear as USB Mass Storage by default, no driver is needed
Supports MicroPython, CircuitPython, C, C++, C alike in Arduino IDE Programming Language
Drag and Drop Program loading method, just like moving file in Windows Explorer
Peripheral rich:
30 GPIO (4 reserves for QSPI interface to external Flash IC)
26 multifunction 3.3V General Purpose I/O (GPIO)
23 GPIO are digital-only
5 x 12-bit ADC capable of 500Ksps, Analog to Digital Converter
4 x ADC extended to GPIO
1 x ADC tied to an internal temperature sensor
2 x UART (Universal Asynchronous Receiver/Transmitter)
2 x SPI (Serial Peripheral Interface)
2 x I2C (Inter IC)
16 x PWM (Pulse Width Modulation)
1 x Timer with 4 alarms
1 x Real Time Counter
2 x Programmable IO (PIO) blocks that can emulate high-speed interfaces such as SD card or VGA
3-pin ARM Serial Wire Debug (SWD) port
Accelerated floating-point libraries on-chip
Comprehensive SDK, software examples, and documentation
QFN-56 package:
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan