5.0/ 5.0
100% pembeli merasa puas
35 rating • 17 ulasan
5(35)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Hitam
Atur jumlah dan catatan
Stok: Sisa 3
Subtotal
Rp2.999.000
TOPPING DX3 Pro+ LDAC ES9038Q2M DSD512 DAC NFCA Headphone Amp / Pre - Hitam
Rp2.999.000
Pilih warna: Hitam
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Headphone Amplifier DAC
GARANSI 1 TAHUN !!!
Product Highlights:
- Four output modes: Headphone Amp, Headphone Amp+Line out, DAC, and Pre-amplifier.
- QCC5125 chipset, supports LDACIAAC/SBCIAPTXIAPTX LL/APTX HD protocol
- 2nd generation 8 core XMOS XU208, USB input supports up to PCM32bit768kHz and DSD512 native
- Optimized NFCA circuit, with ultra low noise and distortion
- 32ohm load: 1800mW x2 | 300ohm load: 250mW x2
- Two gain settings, +6dB Lo Gain | +19dB Hi Gain
The evolution of a classic
The TOPPING DX3 Pro+ DAC/Amp is TOPPING’s upgrade of their classic DX3 Pro. With a new Bluetooth chip and DAC chip, the Pro+ outperforms its predecessor while also coming in at a lower price point. The Pro+ has 60% lower THD+N (DAC), 85% lower THD+N (HPA), over 100% more power, and 90% lower output impedance than the DX3 Pro (LDAC version).
Bluetooth 5.0 LDAC
Hi-Res Audio Wireless and LDAC are supported with a Qualcomm QCC5152 chip. Unlike other DACs that decode Bluetooth codecs with the Bluetooth chip, the DX3 Pro+ uses the ESS ES9038Q2M chip for decoding for even better performance.
Low noise NFCA circuit
An optimized NFCA circuit provides powerful, distortion-free performance: 1800mWx2 @32Ω, 0.00015% THD+N.
High/low gain settings
Two gain settings (+6dB/+19dB) make it easy to adjust for the varying impedances of IEMs and full-sized headphones.
Four output modes
Adapt to every listening situation with the DX3 Pro+’s four output modes: headphone amp, headphone amp + DAC, DAC, and preamplifier.
COAX / OPT in
PCM: 44.1kHz-192kHz / 16bit-24bit
DSD (Native): Not Supported
DSD (DoP): DSD64
Bluetooth In
PCM: AAX, SBC, aptX, aptX LL, aptX HD, LDAC
DSD (Native): Not Supported
DSD (DoP): Not Supported
Product Highlights:
- Four output modes: Headphone Amp, Headphone Amp+Line out, DAC, and Pre-amplifier.
- QCC5125 chipset, supports LDACIAAC/SBCIAPTXIAPTX LL/APTX HD protocol
- 2nd generation 8 core XMOS XU208, USB input supports up to PCM32bit768kHz and DSD512 native
- Optimized NFCA circuit, with ultra low noise and distortion
- 32ohm load: 1800mW x2 | 300ohm load: 250mW x2
- Two gain settings, +6dB Lo Gain | +19dB Hi Gain
The evolution of a classic
The TOPPING DX3 Pro+ DAC/Amp is TOPPING’s upgrade of their classic DX3 Pro. With a new Bluetooth chip and DAC chip, the Pro+ outperforms its predecessor while also coming in at a lower price point. The Pro+ has 60% lower THD+N (DAC), 85% lower THD+N (HPA), over 100% more power, and 90% lower output impedance than the DX3 Pro (LDAC version).
Bluetooth 5.0 LDAC
Hi-Res Audio Wireless and LDAC are supported with a Qualcomm QCC5152 chip. Unlike other DACs that decode Bluetooth codecs with the Bluetooth chip, the DX3 Pro+ uses the ESS ES9038Q2M chip for decoding for even better performance.
Low noise NFCA circuit
An optimized NFCA circuit provides powerful, distortion-free performance: 1800mWx2 @32Ω, 0.00015% THD+N.
High/low gain settings
Two gain settings (+6dB/+19dB) make it easy to adjust for the varying impedances of IEMs and full-sized headphones.
Four output modes
Adapt to every listening situation with the DX3 Pro+’s four output modes: headphone amp, headphone amp + DAC, DAC, and preamplifier.
COAX / OPT in
PCM: 44.1kHz-192kHz / 16bit-24bit
DSD (Native): Not Supported
DSD (DoP): DSD64
Bluetooth In
PCM: AAX, SBC, aptX, aptX LL, aptX HD, LDAC
DSD (Native): Not Supported
DSD (DoP): Not Supported
Ada masalah dengan produk ini?