5.0/ 5.0
100% pembeli merasa puas
21 rating • 5 ulasan
5(20)95.24%
4(1)4.76%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 660
Subtotal
Rp350.000
POE EXTENDER / POE ACTIVE SPLITTER / POE SPLITTER 2 PORT 1000MBPS
Rp350.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Aksesoris CCTV
POE Extender / POE ACTIVE SPLITTER
Comply with IEEE 802.af Power over Ethernet (100/1000M Supported)
Extender the range of PoE an additional 200meters
Automatically detects and protects PoE equipment from being damaged by incorrect installation
Plug-and Play no configuration required
2 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.
2-Port PoE Extender has 3 100/1000M Lan ports, among them, one for power input, the other two for power output. Comply with 100/1000BASE-TX,IEEE 802.3 af-PoE.
Power input for one port is 13W. Power output for four port is 12.2W.
Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far away from the power outlets
Installed at hotels, schools, buildings, villages, etc.
Specification
POE input: 1 RJ45 port (DC 44-57V, 802.3at)
POE output: 2 RJ45 port (48V, 802.3af)
POE Pin Output: 1/2(+), 3/6(-)； MAX Power 15W
Network Medium: Cat5 or better UTP cables (less than 120m)
Repeater Mode: Store and forward
MAC Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 1.0Gbps
PoE Standard: IEEE 802.3af
Input power: 13 Watts
Output power: 12.2 Watts
Power Supply Type: 1/2+,3/6-,Mode A, End-Span
Network Protocol: IEEE 802.3i-100BASE-T, IEEE 802.3u: 1000BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;
Working temperature: -10°c to 45°c
Working Humidity: 5%~90%, No Condensation;
Dimension: 44x88x22mm / 2.95'' x 3.46'' x 0.86''
Comply with IEEE 802.af Power over Ethernet (100/1000M Supported)
Extender the range of PoE an additional 200meters
Automatically detects and protects PoE equipment from being damaged by incorrect installation
Plug-and Play no configuration required
2 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.
2-Port PoE Extender has 3 100/1000M Lan ports, among them, one for power input, the other two for power output. Comply with 100/1000BASE-TX,IEEE 802.3 af-PoE.
Power input for one port is 13W. Power output for four port is 12.2W.
Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far away from the power outlets
Installed at hotels, schools, buildings, villages, etc.
Specification
POE input: 1 RJ45 port (DC 44-57V, 802.3at)
POE output: 2 RJ45 port (48V, 802.3af)
POE Pin Output: 1/2(+), 3/6(-)； MAX Power 15W
Network Medium: Cat5 or better UTP cables (less than 120m)
Repeater Mode: Store and forward
MAC Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 1.0Gbps
PoE Standard: IEEE 802.3af
Input power: 13 Watts
Output power: 12.2 Watts
Power Supply Type: 1/2+,3/6-,Mode A, End-Span
Network Protocol: IEEE 802.3i-100BASE-T, IEEE 802.3u: 1000BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;
Working temperature: -10°c to 45°c
Working Humidity: 5%~90%, No Condensation;
Dimension: 44x88x22mm / 2.95'' x 3.46'' x 0.86''
Ada masalah dengan produk ini?