Atur jumlah dan catatan
Stok Total: Sisa 4
Subtotal
Rp166.000
Nozzle Wiper - X1 Series And P1 Series
Rp166.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Minimum total order Rp50Ribu ya gan biar bisa proses !! The Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. It consists of PP elastic structure, PTFE tube, and a lock screw.
When the PP elastic structure undergoes plastic deformation or fracture, the nozzle wiper can be replaced.
When the PTFE tube becomes loose and can be rotated, please tighten the screws to ensure that the PTFE tube cannot be rotated (be careful not to over-tighten it to cause slippage).
If slippage occurs, please replace the nozzle wiper.
When the PP elastic structure undergoes plastic deformation or fracture, the nozzle wiper can be replaced.
When the PTFE tube becomes loose and can be rotated, please tighten the screws to ensure that the PTFE tube cannot be rotated (be careful not to over-tighten it to cause slippage).
If slippage occurs, please replace the nozzle wiper.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan