FLUKE 773 Milliamp Process Clamp Meter

FLUKE 773 Milliamp Process Clamp Meter #34;HARAP KONFIRMASI STOK BARANG SEBELUM MELAKUKAN ORDER #34; features: *) Best in class 0.2 % accuracy *) 0.01 mA resolution and sensitivity *) Measure 4 to 20 mA signals without breaking the loop *) Measure mA signals for PLC and control system analog I/O *) Dual backlit display with both mA measurement and percent of 4 to 20 mA span *) Measurement Spotlight illuminates hard to see wires in dark enclosures *) Detachable clamp with extension cable for measurements in tight locations *) Measure 10 to 50 mA signals in older control systems using the 99.9 mA range *) Automatically change the 4 to 20 mA output for remote testing *) Power saving features, auto-off, backlight timeout extend battery life *) Measure 4 to 20 mA signals with in-circuit measurement *) Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters *) Source 4 to 20 mA signals for testing control system I/O or I/Ps *) mA output linear ramp or 25% step output *) DC voltage measurement to verify 24V power supplies or voltage I/O signals *)Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals *)Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp *) Enables milliamp signal logging to a separate logging device without breaking the loop *) Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal *) Apply a mA input signal to a device and measure its 4-20 mA output on devices such as valves or mA isolators *) Voltage output linear ramp or 25% step output *) Automatically change the voltage output for remote testing BATAS PENGIRIMAN: *) SENIN-JUM #39;AT MULAI DARI PUKUL 09:00-16:00 WIB *) SABTU MULAI DARI PUKUL 09:00-12:00 WIB *) MINGGU DAN TANGGAL MERAH TUTUP