MEGGER MIT420-2 Cat IV Insulation Tester 1000V Alat Ukur Listrik

The MIT420/2 from Megger is a MIT400 series CAT IV insulation tester with
polarisation index (PI), dielectric absorption ratio (DAR) functions, variable
test voltage range (VAR) and result storage. It is designed not only for
electrical and industrial testing but also for exceptionally wide range of
applications from electrical installations, cable testing, motor testing,
automotive, ESD, panel building, avionics, maintenance. Insulation testing has
been enhanced with feedback controlled test voltages to limit overvoltage to 2%
rather than industry standard 10-20%. A variable range has been added to allow
any intermediate voltage from 10V to 1000V in 10V steps where application
specific test voltages are required that do not appear in standard ranges. It
has redesigned weatherproof tough housing, back stand & 6 cell battery
compartment with separate fuse access. The dimension is 108mm x 228mm x 63mm (W
x D x H) and weight is 600g. It operates -10C to +55C temperature.

50V, 100V, 250V, 500V and 1000V insulation test voltage and 200Gohm range
Stabilised insulation test voltage, live circuit detection and protection
Single range, faster continuity testing from 0.01ohm to 1Mohm
600V TRMS AC and DC voltage measurement, 0.25Mohm input impedance
Test inhibit, insulation buzzer, test lock, lead null and buzzer
CAT IV 600V / CAT III 1000V & IP54 rated, meets international requirements of
IEC61010 and EN61557
Auto power down (setup), auto reverse polarity (setup ON-OFF), 15Hz to 400Hz
frequency measurement
2% test voltage accuracy, pass/fail indication, test voltage, measurement range
and voltage display
Display offers a combination of analogue arc and dual digital readout
0.1nF to 10F capacitance range and onboard memory

Applications

Test & Measurement
Contents

MIT420/2 insulation tester, Red/black silicone test leads, SP5 remote switch
probe, Information CD, Batteries 6 x AA alkaline, Hard carry case.