Thermostat High Temperatur -30 to 500 Celsius Alat Kontrol Suhu Tinggi

Thermostat atau Temperature Controller 220v dengan rentang pengukuran sangat tinggi: -30 celcius sampai +500 celcius.
Dimana termostat pada umumnya hanya mampu mengukur sampai kisaran +150 celcius

==========
Temperature range: -30C ~ 500C / -22F ~ 932F
Resolution: 1C
Output type:
Control output: N.O. 10A/250VAC
Alarm output: N.O. 10A/250VAC

Size: 88x77x35mm
Dimension of installation hole: 70,5x29mm
Environmental requirement: -30C~60C, 20%~85% humidity

Sensor: K tip. thermocouple with 1m cable
Refresh: 2 times per second


Parameter Function Description
Long-time press Set with 5 seconds to enter the internal parameter settings, press the up and down to switch F0 '' F8 ,press Rst to confirm the return.

PO cooling, heating mode
High temperature start for the cooling mode please set to C;
Common for the device overheating start fan cooling, such as the radiator temperature exceeds the number of degrees when starting the fan cooling, that is, cooling for the cooling mode;
Low temperature start for the heating mode, please set to H, common for some kind of object heating, for example to hatch to 37 degrees to stop, or heating to 30 degrees to stop, or burn to 100 degrees stop are heating mode;

P1 hysteresis set
In the heating mode (H): Measured value set value ''" hysteresis, start output heating to set value stop;
Cooling mode (C): the measured value set value + hysteresis, start the output cooling to the set value to stop;

P2 temperature correction
When the measured temperature and standard temperature deviation, you can use this function correction, the corrected temperature = before the correction of the temperature
Degree + correction value

P3 high temperature alarm
When the measured value is greater than this value of the screen temperature flashing and drop the sound alarm