Radiolink M8N GPS SE100

The SE100 is suitable for use with all the open source flight controllers such as PIX, APM, NAZE32 and so on, making it a versatile all-round GPS. This module ships with a powerful Ubox UBX-M8030(M8) GPS receiver with a Honeywell HMC5983 digital compass. With high-speed satellite discovery, 20 satellites can be positioned within 6 seconds giving a position accuracy of 500mm. Features: • Suitable for all the open source flight controller such as PIX, APM, NAZE32 and so on • 500mm position accuracy with concurrent GNSS, 2500mm with single GNSS • Positioning 20 satellites in 6 seconds at open ground • Valley station-keeping ability • Concurrent reception of GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1, SBASL1 C/A: WAAS, EGNOS, MSAS, two GNSS working at the same time • GPS decoder chip: Radiolink M8N GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon, is much better than single GNSS 7N Specs: GPS decoder chip: Radiolink M8N GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon Geomagnetic: HMC5983 from Honeywell Antenna: 2.5dbI high gain and selectivity ceramic antenna Power amplify IC: MMIC BGA715L7 from Infineon Double Filter: SAWF (Surface acoustic wave filter) form Murata Positional Accuracy: 0.5m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity, Tracking amp; Nav.: -167dBm; Reacquisition: -163dBm; Cold start: -151dBm; Hot start: -159dBm Time to first fix: Cold start: 26s, Hot start: 1s Power supply: voltage 3.3VDC+-5%, current 50~55mA Port A: GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K Port B: Geomagnetic I2C interface Size: 49x43x16mm Weight: 34.9g Antenna: 300mm Connect to PIX: 4pin connect to I2C, 6pin connect to GPS Includes: 1 x GPS module with cable 1 x GPS Holder