Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp2.800.000
ATTEN AT8586 Blower And Solder Work Station AT-8586 Hot Air And Solder
Rp2.800.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Macam-macam
ATTEN AT8586 BLOWER + SOLDER STATION ORIGINAL
Features
Hot air station and soldering station set (the two of them can work separately without mutual interference).
Digital LED temperature display, so that the operation more convenient and accurate.
Self-examine and errors check, with screen reminding to guide people to repair.
Adopts Closed-loop control sensors for temperature accuracy and stability.
Ideal for safe demolition solder QFP, PLCC, SOP, BGA and other chips and components which are temperature-sensitive.
Intelligent cooling system, after the shutdown delay completion of the work of air, air temperature lower than 100 c automatically cut off power supply.
Use of imported air pump for low vibration, noise-free design and maintain a quiet working environment.
Static elimination design, prevent PCB board damage due to static or electric leakage.
Technical Specifications:
Voltage: AC 220V 10% 50Hz
Whole Power: 750W
Hot Air SMD Reworks Station
Voltage: AC 220V 10% 50Hz
Output power: 700W
Temperature range:100c-55c
Temperature stability: 5c
Air output: 120L/min (The MAX.)
Soldering Station
Voltage: AC 26V 50Hz
Output power: 50W
Temperature range:200c-480c
Temperature stability: 2c Static (No wind, no load)
Leak resistance of soldering tip :< 2
Leak voltage of soldering tip :< 3mv
Features
Hot air station and soldering station set (the two of them can work separately without mutual interference).
Digital LED temperature display, so that the operation more convenient and accurate.
Self-examine and errors check, with screen reminding to guide people to repair.
Adopts Closed-loop control sensors for temperature accuracy and stability.
Ideal for safe demolition solder QFP, PLCC, SOP, BGA and other chips and components which are temperature-sensitive.
Intelligent cooling system, after the shutdown delay completion of the work of air, air temperature lower than 100 c automatically cut off power supply.
Use of imported air pump for low vibration, noise-free design and maintain a quiet working environment.
Static elimination design, prevent PCB board damage due to static or electric leakage.
Technical Specifications:
Voltage: AC 220V 10% 50Hz
Whole Power: 750W
Hot Air SMD Reworks Station
Voltage: AC 220V 10% 50Hz
Output power: 700W
Temperature range:100c-55c
Temperature stability: 5c
Air output: 120L/min (The MAX.)
Soldering Station
Voltage: AC 26V 50Hz
Output power: 50W
Temperature range:200c-480c
Temperature stability: 2c Static (No wind, no load)
Leak resistance of soldering tip :< 2
Leak voltage of soldering tip :< 3mv
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan