4.9/ 5.0
100% pembeli merasa puas
24 rating • 4 ulasan
5(21)87.5%
4(3)12.5%
3(0)0%
2(0)0%
1(0)0%
Hioso 7db
Atur jumlah dan catatan
Stok: Sisa 9
Subtotal
Rp330.000
[𝗢𝗥𝗜𝗚𝗜𝗡𝗔𝗟] SFP EPON OLT PX20+++ 9db HSQG HIOSO - Hioso 7db
Rp330.000
Pilih sfp px20 hsgq: Hioso 7db
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: SFP
EPON OLT Module (EPON PX20+++) +9db COMPATIBLE SUPPORT HIOSO
Features
● 1.25Gb/s serial optical interface compliant to 802.3AH specifications small form factor pluggable module “SFP”
● 1490 nm DFB transmitter, 1310 nm APD photo detector BURST receiver
● 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
● Operating case temperature: 0 to 70 °C or-40 to 85 °C
● All-metal housing for superior EMI performance
● Low power consumption
● Cost effective OLT solution,
● RoHS compliant
Applications
● GEPON networks
● FTTX
General Description
● This 1490nm DFB EPON OLT SFP transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 20km.
● The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled.
● The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.
● The transmitter converts 1.25Gbit/s serial CML electrical data into serial optical data compliant with the 10GBASE-LR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ.
Features
● 1.25Gb/s serial optical interface compliant to 802.3AH specifications small form factor pluggable module “SFP”
● 1490 nm DFB transmitter, 1310 nm APD photo detector BURST receiver
● 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
● Operating case temperature: 0 to 70 °C or-40 to 85 °C
● All-metal housing for superior EMI performance
● Low power consumption
● Cost effective OLT solution,
● RoHS compliant
Applications
● GEPON networks
● FTTX
General Description
● This 1490nm DFB EPON OLT SFP transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 20km.
● The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled.
● The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.
● The transmitter converts 1.25Gbit/s serial CML electrical data into serial optical data compliant with the 10GBASE-LR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ.
Ada masalah dengan produk ini?