5.0/ 5.0
100% pembeli merasa puas
5 rating • 4 ulasan
5(5)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99998
Subtotal
Rp420.000
Betaflight Raceflight F4 Flight Control V1.2 Stable Version
Rp420.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Flight Controller
This is v1.2 which supports PPM satellite Spektrum receivers!
Performs amazing on DShot 600!!!!
This board is direct from Sunrise Model and does not have the Hyperlite Logo.
Details:
New to the market comes the F4 HyperLite flight controller. PiroFlipRC and Sunrise got together and designed this board for racing in mind. This is the next generation of flight controllers that have been desired by many people. Feel the difference by hooking into one of these!
How to Flash RaceFlight!
Uses raceflight_REVO.bin (worked great!)
To flash RF, follow the instructions here!
I used zadig(download here) to set Revolution 0 to WinUSB & Revolution 1 to USB Serial(CDC)
Get the latest Raceflight Configurator
Video on how to install .crx
Once you download the configurator(cfgrf.crx), click the 3 verticle dots on the top right of your Chrome browser, click settings, click extension tab on the left.
Now drag and drop the cfgrf.crx file onto the extensions webpage to load it.
How to Flash BetaFlight!
Uses betaflight_X.X.X_REVO.hex
To flash BF, follow these instructions.
While plugging in the USB cable, hold the Bootloader button down. Once the light is solid red, you can let go.
Use zadig(download here) to change STM32 Bootloader to WinUSB. This will put the FC in DFU mode
Open Betaflight and go to the flashing section
Choose the firmware desired.
Make sure the following options are turned on
No boot sequence
Full chip erase
Manual baud rate: 256000
Specifications:
STM32F405 CPU
MPU6000 Accelerometer and Gyro
MicroUSB socket
7pin JST-SH Socket (SUBS, SERIAL RX,TX, 5V, GND)
6 x though-holes headers for ESC
36 x 36mm board with standard 30.5mm mounting holes
Weight: 5g
Performs amazing on DShot 600!!!!
This board is direct from Sunrise Model and does not have the Hyperlite Logo.
Details:
New to the market comes the F4 HyperLite flight controller. PiroFlipRC and Sunrise got together and designed this board for racing in mind. This is the next generation of flight controllers that have been desired by many people. Feel the difference by hooking into one of these!
How to Flash RaceFlight!
Uses raceflight_REVO.bin (worked great!)
To flash RF, follow the instructions here!
I used zadig(download here) to set Revolution 0 to WinUSB & Revolution 1 to USB Serial(CDC)
Get the latest Raceflight Configurator
Video on how to install .crx
Once you download the configurator(cfgrf.crx), click the 3 verticle dots on the top right of your Chrome browser, click settings, click extension tab on the left.
Now drag and drop the cfgrf.crx file onto the extensions webpage to load it.
How to Flash BetaFlight!
Uses betaflight_X.X.X_REVO.hex
To flash BF, follow these instructions.
While plugging in the USB cable, hold the Bootloader button down. Once the light is solid red, you can let go.
Use zadig(download here) to change STM32 Bootloader to WinUSB. This will put the FC in DFU mode
Open Betaflight and go to the flashing section
Choose the firmware desired.
Make sure the following options are turned on
No boot sequence
Full chip erase
Manual baud rate: 256000
Specifications:
STM32F405 CPU
MPU6000 Accelerometer and Gyro
MicroUSB socket
7pin JST-SH Socket (SUBS, SERIAL RX,TX, 5V, GND)
6 x though-holes headers for ESC
36 x 36mm board with standard 30.5mm mounting holes
Weight: 5g
Ada masalah dengan produk ini?