4.9/ 5.0
97% pembeli merasa puas
39 rating • 11 ulasan
5(38)97.44%
4(0)0%
3(1)2.56%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 368
Subtotal
Rp10.900
D4184 High Power Dual MOSFET Driver Modul untuk PWM Switch Trigger
Rp10.900
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: COM o MOSFET Module
Module features:
1. With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.
2. Compatible with MCU and Arduino control board, 3V or 5V signal
3. High level start, low level stop, PWM speed regulation
4 .Widely used to control the start and stop of the motor, solenoid valve and other tributary equipment
5. There are various specifications of MOS tube to provide choices,
6. The signal input side can be welded to the terminal or pin itself, compatible breadboard
7. Output can be soldered to the terminal or direct wire
8. Module size 23mm X 16mm There are two 2mm diameter screw holes, hole spacing 8mm
1. With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.
2. Compatible with MCU and Arduino control board, 3V or 5V signal
3. High level start, low level stop, PWM speed regulation
4 .Widely used to control the start and stop of the motor, solenoid valve and other tributary equipment
5. There are various specifications of MOS tube to provide choices,
6. The signal input side can be welded to the terminal or pin itself, compatible breadboard
7. Output can be soldered to the terminal or direct wire
8. Module size 23mm X 16mm There are two 2mm diameter screw holes, hole spacing 8mm
Ada masalah dengan produk ini?