5.0/ 5.0
100% pembeli merasa puas
69 rating • 9 ulasan
5(68)98.55%
4(1)1.45%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 149
Subtotal
Rp10.000
Infrared Digital IR Receiver 38 kHz Sensor Module | TSOP38438
Rp10.000
The 38KHz IR Digital Receiver Module is surprisingly complex for its size, with 38KHz modulation, advanced filtering and versatile binary output signals.
These 38KHz IR Digital Receiver Modules are a fantastic choice for almost any project in which you want to integrate IR Communications, as they are natively compatible with Arduino Boards as well as many other types of development platforms. It includes everything you need aside from the controller board and the transmitter or remote control, and simply requires the three pins - DAT, VCC and GND - to be connected to the right ports.
It is capable of receiving signals from almost any IR remote or transmitter that uses NED, Sharp or R-Step encoding, and utilises a carrier signal of 38KHz with a minimum of 10 cycles per burst. And just to make your job as a Maker even easier, this module outputs binary data signals. This means it is not only easy to communicate with, but also capable of working with almost any binary signal-based Electronics Modules and components without any extra coding - making it one of the simplest yet most versatile IR receivers on the market.
Specifications:
IR Sensor: TSOP38438
Modulation Frequency: 38KHz
Cycles Per Burst: Minimum 10
Tested IR-Code Compatibility: NEC / Sharp / R-Step
Signal Gain: Onboard: Automatic & Non-Adjustable
Output Signal Type: Binary (Data)
Operating Voltage: 3.3V to 5.5V DC (Optional)
Mounting Hole Size: M2
These 38KHz IR Digital Receiver Modules are a fantastic choice for almost any project in which you want to integrate IR Communications, as they are natively compatible with Arduino Boards as well as many other types of development platforms. It includes everything you need aside from the controller board and the transmitter or remote control, and simply requires the three pins - DAT, VCC and GND - to be connected to the right ports.
It is capable of receiving signals from almost any IR remote or transmitter that uses NED, Sharp or R-Step encoding, and utilises a carrier signal of 38KHz with a minimum of 10 cycles per burst. And just to make your job as a Maker even easier, this module outputs binary data signals. This means it is not only easy to communicate with, but also capable of working with almost any binary signal-based Electronics Modules and components without any extra coding - making it one of the simplest yet most versatile IR receivers on the market.
Specifications:
IR Sensor: TSOP38438
Modulation Frequency: 38KHz
Cycles Per Burst: Minimum 10
Tested IR-Code Compatibility: NEC / Sharp / R-Step
Signal Gain: Onboard: Automatic & Non-Adjustable
Output Signal Type: Binary (Data)
Operating Voltage: 3.3V to 5.5V DC (Optional)
Mounting Hole Size: M2
Ada masalah dengan produk ini?