4.9/ 5.0
97% pembeli merasa puas
36 rating • 8 ulasan
5(33)91.67%
4(2)5.56%
3(1)2.78%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp15.200
L298N DC Motor / DC Stepper Motor Driver | Arduino MCU Control
Rp15.200
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: COM o Motor Driver
Features:
This module uses L298N chip as the main driver, with driving ability, low heat, strong anti-interference ability characteristics.
This module can use the built-78M05 take power by driving the power part of the work, but in order to avoid damage to the regulator chip, when the drive voltage is greater than 12V, please use an external 5V logic supply.
This module uses high-capacity filter capacitors, wheeling protection diodes can improve reliability.
Specification :
=================================
- Driver: L298N
- Driver power supply: +5V~+46V
- Driver Io: 2A
- Logic power output Vss: +5~+7V (internal supply +5V)
- Logic current: 0~36mA
- Controlling level: Low -0.3V~1.5V, high: 2.3V~Vss
- Enable signal level: Low -0.3V~1.5V, high: 2.3V~Vss
- Max power: 25W (Temperature 75C)
- Working temperature: -25C~+130C
- Dimension: 60mm*54mm
This module uses L298N chip as the main driver, with driving ability, low heat, strong anti-interference ability characteristics.
This module can use the built-78M05 take power by driving the power part of the work, but in order to avoid damage to the regulator chip, when the drive voltage is greater than 12V, please use an external 5V logic supply.
This module uses high-capacity filter capacitors, wheeling protection diodes can improve reliability.
Specification :
=================================
- Driver: L298N
- Driver power supply: +5V~+46V
- Driver Io: 2A
- Logic power output Vss: +5~+7V (internal supply +5V)
- Logic current: 0~36mA
- Controlling level: Low -0.3V~1.5V, high: 2.3V~Vss
- Enable signal level: Low -0.3V~1.5V, high: 2.3V~Vss
- Max power: 25W (Temperature 75C)
- Working temperature: -25C~+130C
- Dimension: 60mm*54mm
Ada masalah dengan produk ini?